Monitor Audio Silver 8G On-Wall Loudspeaker (each)

Monitor Audio Silver On-Wall 8G On-Wall Speaker A Slim, Flexible 2-Way Design for Stereo, LCR, and Surround Applications The Monitor Audio Silver On-Wall 8G brings the engineering of the Silver Series 8G to a slim cabinet designed specifically for wall-mounted systems. It combines a 6" C-CAM RST III mid-bass driver with a 25 mm C-CAM Gold Dome tweeter and can be mounted horizontally or vertically, giving it unusual flexibility for both music and home theater installations. Used around a screen, the Silver On-Wall 8G can serve as a left, center, or right channel. It can also be used for side and rear effects channels in a multichannel system, while its 2-way configuration and full-range design make it equally suitable for wall-mounted stereo applications. Each speaker is sold individually. C-CAM Drivers With RST III Geometry The 6" mid-bass driver uses Monitor Audio's C-CAM cone material and RST III geometry, paired with the company's 25 mm C-CAM Gold Dome tweeter. A refined crossover integrates the two drivers at 2.9 kHz, with the speaker specified for an in-room frequency response of 44 Hz–35 kHz at -6 dB. Engineered for a Slim Cabinet Silent Flow Port Technology manages airflow from the compact enclosure, while Through-Bolt Technology braces the driver to help increase cabinet rigidity and minimize unwanted resonance. At just 5 5/16" deep with all accessories fitted, the cabinet keeps a low profile against the wall without requiring an in-wall installation. Horizontal or Vertical Installation The Silver On-Wall 8G can be installed in either horizontal or vertical orientation, allowing the same speaker to fill several roles within a system. Three finishes—High Gloss Black, European Walnut, and Satin White—provide options for integrating the speaker with a room, display, or other Silver Series 8G models. Features 2-way on-wall loudspeaker for stereo and home theater systems 1 x 6" C-CAM RST III mid-bass driver 1 x 25 mm C-CAM Gold Dome tweeter Flexible horizontal or vertical wall mounting Suitable for left, center, right, side, and rear channel applications Refined crossover design Silent Flow Port Technology Through-Bolt Technology for increased cabinet rigidity Available in High Gloss Black, European Walnut, and Satin White Sold individually Specifications System Format: 2-way Frequency Response, In-Room (-6 dB): 44 Hz–35 kHz Sensitivity (2.83 Vrms at 1 m, Free-Field): 88 dB Nominal Impedance: 8 ohms Minimum Impedance (20 Hz–20 kHz): 5.5 ohms at 20 kHz Maximum Peak SPL (AES75, Z-Weighted): 112 dB Continuous Power Handling (CTA 426-B): 100 W Recommended Amplifier Power (RMS, Music Signal, 4 Ohms): 50–200 W Recommended Amplifier Power (RMS, Music Signal, 8 Ohms): 25–100 W Bass Alignment: Silent Flow Port Technology Port Tuning Frequency: 47 Hz Crossover Frequency: LF/HF: 2.9 kHz Drive Unit Complement: 1 x 6" C-CAM RST III mid-bass driver; 1 x 25 mm C-CAM Gold Dome tweeter Finishes: High Gloss Black, European Walnut, Satin White Dimensions With All Accessories Fitted (H × W × D): 18 5/16" x 11 13/16" x 5 5/16" (465 x 300 x 135 mm) Sold As: Single Warranty: 5 years Weight: 19.6 lb. (8.9 kg)