Monitor Audio Platinum 200 3G

The Platinum 200 3G is a slim and compact three-way floorstander, designed to deliver a rich, dynamic high-end performance with tight, controlled bass. It boasts an MPD III transducer, a 4” RDT III mid-range driver, and twin 6” RDT III bass drivers. Key Features: MPD III transducer   4” RDT III mid-range driver   Slim and compact three-way loudspeaker   Exceptionally large soundstage   Rear-ported   Embellished with etched inlays "A rich and dynamic sound that is genuinely high end" Objects of Desire Capable of delivering levels of bass extension and detail normally only found in the largest of floorstanding loudspeakers, the Platinum 200 3G is capable of providing an exceptionally large soundstage from a relatively diminutive form. The new MPD III transducer and RDT III mid-range and bass driver cones have refined the overall balance of the speaker and reduced distortion, while also allowing it to deliver an exceptional room-filling performance. It also benefits from a new cast outrigger and crossover-mounted plinth assembly. Specifications Category Details System Format 3-Way Frequency Response, Free-Field (-6dB) 32 Hz – 60 kHz Frequency Response, In-Room (-6dB) 23 Hz – 60 kHz Sensitivity (2.83 Vrms @ 1m, Free-Field) 88 dB Nominal Impedance 4 Ohms Minimum Impedance (20 Hz to 20 kHz) 4.0 Ohms @ 2.5 kHz Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor) 300 W Recommended Amplifier Power (RMS into 4 Ohm, Music Signal) 150 – 600 W Bass Alignment Ported Port Tuning Frequency 38 Hz Crossover Frequency LF/MF: 825 Hz MF/HF: 3 kHz Drive Unit Complement 2 x 6" RDT III bass driver, 1 x 4" RDT III mid-range driver, 1 x MPD III tweeter External Dimensions including Trims, Terminals & Outrigger Feet & Spikes (H x W x D) 1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8") External Dimensions including Trims, Terminals & Outrigger Feet without spikes (H x W x D) 1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8") Weight (each) 35.8 kg (78 lb 14 oz) Warranty 5 years