
$129.99
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The V3 of the Mobula6 2024 is Happymodel's 65mm analog BNF for the 2025-2026 season, with lots of significant upgrades to the already-winning design. The ultralight frame and the pigtail are the same, but almost every other component has been upgraded in some way. First and foremost the flight controller has been upgraded to the CrazyG473 5in1, with significantly more processing power. The camera has been upgraded to the Nano5 Camera, which has a wider FOV (155°) and higher resolution at 1200TVL. The motors are the same 702 28,000kV, but are now thankfully direct-soldered to the FC. Although it comes with the same Gemfan 1208-3 props, this package now also includes ultralight props from HQ PROP, which is an upgrade I personally always go for. Here's what HappyModel has to say about it: Features: Come with New CrazyG473 AIO flight controller Happymodel New 1200TVL Nano5 camera Super light 1S 65mm Brushless whoop only 17.6g Equipment with the lightest brushless motors-SE0702 only 1.46gram Smooth and powerful Built-in Serial ELRS receiver Built-in Power max to 400mw openVTX Specifications: Brand Name: Happymodel Item Name: Mobula6 2024 V3 1S 65mm ultra light micro FPV Whoop Wheelbase: 65mm Size: 81mm*81mm*37mm Weight: 17.6g Receiver option: 2.4GHz ExpressLRS Serial receiver Package includes: Mobula6 2024 1S 65mm whoop Drone Frame +Canopy CrazybeeG473 AIO 5-IN-1 Flight controller 4x SE0702 KV28000 brushless motor Gemfan 1208-3 31mm tri-blade propellers(4cw+4ccw) HQPROP ultralight whoop prop 1.2x1.1x3(2cw+2ccw) Nano5 1200TVL camera NTSC 4:3 Onboard 5.8G 25mw~400mw VTX Spare canopy Propeller disassemble tool Screw driver Spare parts specifications: Motor SE0702 KV28000 no plug version Configu-ration:9N12P Stator Diamter:7mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ9.5mm*14mm Weight(g):1.46g No.of Cells(Lipo):1S only Propellers Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm Flight controller MCU: STM32G473CEU6 Gyro: ICM42688P Blackbox memory: 16MB Sensor: Voltage & Current BEC: 5V, Max. 2A UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX) BetaFlight OSD: AT7456E ESC: 5A continuous RX: Serial ELRS 2.4GHz RX antenna: Enameled copper wire 31mm length Receiver firmware target: HappyModel EP1/EP2 2.4GHz RX OPENVTX: 5.8GHz 48 channels, Max. 400mW FC firmware target: CRAZYBEEG473 USB port: SH1.0-4Pin Battery connector: A30 Mounting hole size: 25.5mm x 25.5mm Weight: 3.83g without pigtail and vtx antenna Onboard 4in1 ESC Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.21 Firmware target: A_X_5_96KHz Default protocol: DSHOT300 DSHOT600 Recommend ESC Startup power value to min1100/max1200 Onboard Serial ExpressLRS receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based CRSF Compatible with ExpressLRS V3.x.x TX Module Could flash single ELRS receiver firmware by Wifi ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx Onboard 5.8g VTX OPENVTX Firmware Support firmware upgrade by openvtx configurator Output power: PIT/10/25/100/400 Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio2.1 Modulation type: FM Operating temperature: -10℃~+80℃ Antenna port: IPEX1/U.FL Nano5 Camera Image Sensor: 1/3" CMOS Horizontal Resolution: 1200 TVL Lens: 2.1mm (M10) 155° FOV TV System: NTSC Signal-to-Noise Ratio: >52dB Electronic Shutter: Auto Automatic Gain Control (AGC): Auto Minimum Illumination: 0.001Lux@1.2F Digital Wide Dynamic Range: Auto Power Supply: DC 3-5.5V Current: 110mA@5V 120mA@3.3V House Material: ABS Net Weight: 1.57g (1.0mm plug version)
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$129.99