Eterra Hurricane BMX-100 Concrete Mixer for Mini Skid Steer

Eterra Hurricane BMX-100 Concrete Mixer for Mini Skid Steer The Eterra Hurricane BMX-100 is the mini skid steer member of the Hurricane concrete mixer line, formerly sold as the Mix & Go 100 Mini. Scoop your material, mix it on the move or standing still, then dispense exactly where it is needed — no wheelbarrow, no separate mixer, no second trip. Rated for 11–22 GPM with hydraulic hoses and couplers included. Available from Skid Steer Store. Why Mix On the Machine Load, mix and pour with one attachment — the loader that carries material also mixes and places it. Mix while driving — material is ready when you reach the pour instead of after you arrive. Controlled dispensing — place concrete directly into footings, forms and post holes. No electrical connector required — unlike the larger BMX models, the BMX-100 needs no auxiliary electrical port. Hoses and couplers included — ready to plumb into your mini loader. Hurricane Concrete Mixer Line Model Carrier Flow Electrical Connector BMX-100 (Mini) Mini skid steer 11–22 GPM Not required BMX-250 Skid steer / CTL 11–22 GPM Required BMX-450 Skid steer / CTL 11–22 GPM Required BMX-600 Skid steer / CTL 11–22 GPM Required Model numbers denote increasing mixing capacity. Your machine can exceed 22 GPM, but the mixer will not run at full RPM above that range. Mounting The BMX-100 fits mini skid steers on a mini universal mount. If your machine uses the Bobcat MT interface, a Bobcat MT to Mini Universal adapter is available — this optional adapter applies to the BMX-100 only. Common Applications Fence and sign post setting, deck and pergola footings, small slab and pad pours, mortar for hardscape and block work, repair patches, and remote-site work where a truck cannot reach. Frequently Asked Questions Is this the same as the Mix & Go 100 Mini? Yes. The Hurricane BMX-100 is the same mixer previously sold as the Mix & Go 100 Mini. What hydraulic flow do I need? 11 to 22 GPM. Machines can exceed 22 GPM but the mixer will not reach full RPM. Do I need an electrical connector? No. Only the BMX-250, BMX-450 and BMX-600 require one. Can I pair this with an auger? Yes. Many operators dig footings with an Eterra auger drive and mix the concrete with a Hurricane mixer on the same machine. Order From Skid Steer Store Add the BMX-100 to your cart above. Need the Bobcat MT adapter or unsure about your flow rating? Contact Skid Steer Store with your make and model.