Miracle Sealants 511 Seal & Enhance - 1 Quart (32 oz.)

FINAL SALE - this item is not eligible for returns or exchanges. ABOUT 511 SEAL & ENHANCE 511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile and grout surfaces. 511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant. READY TO USE SOLVENT BASE IMPREGNATOR/COLOR ENHANCE FOR: Granite Limestone Marble Ceramic Tile Polished Stone Natural Stone Quarry Tile Slate Grout not for Concrete/Masonry SPECIAL FEATURES: Superior Stain Protection Interior/Exterior One Step Oil Resistant Water Repellent Will not Yellow Enhances Color Grout Release Easy-to-Use Lasts 3 - 5 Years Good for Floors How to Apply Sealer: Step 1: Wipe down the surface to ensure that it is free from dirt and debris. Protect neighboring surfaces such as carpet and wood floors. Step 2: Pour the Sealant into an applicator tray and begin applying using the foam applicator. Apply only enough sealant to wet the surface, do not over-apply. Allow the sealer to stand for 3-5 minutes for maximum penetration. Step 3: Remove all excess sealer with a clean white towel or microfiber towel. Test an area with a few drops of water. If the water absorbs into the material; repeat step 2 after allowing it to dry for 2 hours. If the water does not absorb, the area is ready for foot traffic after 2 hours. The finished area must be kept dry and free of staining materials for 72 hours.