
$38.58
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Minwax PolyShades Stain & Polyurethane, Olde Maple, Quart is intended for interior use. Features Stain and polyurethane in one coat Can change color over existing polyurethane 14 current colors listed on product page Best forInterior wood doors; Trim; Cabinetry; Furniture; Previously stained or varnished wood after prep Specs Color or finish Olde Maple Sheen Satin Selected size Quart Base oil-based soya uralkyd Use interior Coverage 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft/gal; unit should be checked before publishing Touch dry Approximately 6 hours before handling for recoat Recoat At least 6 hours Coats Two to three; third deepens color Apply with Natural bristle brush; Foam brush per PDS Thinning Do not thin Cleanup Regionally compliant cleaner; PDS identifies mineral spirits solvent VOC Maximum 550 per PDS Topcoat compatibility May be coated with Minwax Fast-Drying Polyurethane or Wipe-On Poly for protection without more color Manufacturer part # 61330 How to applyStart with the manufacturer's preparation steps: Clean and dry; remove dirt, grease, glue and dust; Sand bare wood smooth with 220 grit along grain; Lightly sand previously finished wood for adhesion; Oil-based Pre-Stain Wood Conditioner recommended for raw wood. Prepare wood and test color Stir; do not shake or thin Brush on a very thin coat with grain Wait at least 6 hours and rub lightly with fine steel wool; remove dust Apply second thin coat; third if deeper color desired Good to knowUse limits: Floors. Danger: Flammable liquid and vapor; aspiration hazard; may cause allergic skin reaction, drowsiness or dizziness, suspected cancer, and reproductive harm. SDS is for Bombay Mahogany Satin quart. : California warning for cancer and birth defects or other reproductive harm. QuestionsHow much will I need?Use these manufacturer coverage figures: 2023 PDS states approximately 120 to 150 sq ft but labels the table sq ft/gal; unit should be checked before publishing. Match the figure to the container size, and account for the stated number of coats. When can I apply another coat?The listed manufacturer recoat guidance is At least 6 hours. Follow the application conditions and instructions for this product. Manufacturer directions and product information
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$38.58