Mini Cooper EMS2 EWS Delete / IMMO OFF Programming Service (2002-2006)

Mini Cooper EMS2 EWS Delete / IMMO OFF Programming Service (2002-2006) This service is designed for Mini Cooper models equipped with Siemens EMS2 Engine Control Modules (ECM), also referred to as the DME or ECU. We will modify your original ECU to disable the factory Electronic Drive Away Protection (EWS) immobilizer, allowing the engine to operate without EWS authorization. This service is commonly used to resolve immobilizer-related no-start conditions caused by a failed or unsynchronized EWS system, or when installing a replacement ECU. No replacement ECU is included—this is a mail-in programming service performed on your original module. Most orders are completed and shipped back the next business day after receipt. What Is Included? ✔ EWS Delete / IMMO OFF programming ✔ Immobilizer disabled within the ECU ✔ Plug-and-play ECU setup for supported applications ✔ Fast turnaround time Common Reasons for an EWS Delete Our Mini Cooper EMS2 EWS Delete service is commonly used when: The EWS module has failed. The DME and EWS module are no longer synchronized. The vehicle starts and immediately stalls due to an immobilizer issue. A replacement ECU is being installed. Immobilizer-related communication faults are preventing the engine from starting. By removing the immobilizer check from the ECU, the engine no longer requires authorization from the factory EWS system to start. Supported ECU Type Siemens EMS2 Supported Vehicles Mini Cooper R50 2002-2006 Mini Cooper Mini Cooper Convertible R52 2005-2006 Mini Cooper Convertible Mini Cooper S R53 2002-2006 Mini Cooper S Important Requirements ⚠️ This service is performed on your original ECU. No replacement ECU is included. ⚠️ The original ECU must have OBD communication for this service to be completed successfully. ⚠️ Some vehicles may require the factory EWS module to be bypassed with a fuse after the IMMO OFF modification. ⚠️ This service only removes the immobilizer function from the ECU. It does not repair hardware failures or other engine management problems. ⚠️ Physical damage, severe corrosion, or previous unsuccessful repair attempts may affect our ability to complete the service. Shipping Information You Send Us: Your original EMS2 ECU / DME We Will: Perform the EWS Delete / IMMO OFF modification Verify successful programming Return your ECU ready for installation Most orders are completed and shipped the next business day after receipt. Frequently Asked Questions What is EWS? EWS (Electronic Drive Away Protection) is BMW and MINI's factory immobilizer system. It prevents the engine from starting unless the ECU receives authorization from the EWS module. Will this repair my ECU? No. This service only removes the immobilizer function from the ECU. It does not repair damaged or defective hardware. Does the ECU need to communicate? Yes. Your original EMS2 ECU must still have OBD communication for this service to be completed successfully. Do I need to send my EWS module? No. Only your original EMS2 ECU is required. Will I need to bypass the EWS module? Some vehicles require the factory EWS module to be bypassed with a fuse after the IMMO OFF modification. We can provide additional information if needed. Need Help Verifying Compatibility? If you're unsure whether your Mini Cooper is equipped with a Siemens EMS2 ECU, send us your ECU part number and we'll be happy to verify compatibility before you place your order.   © 2026 Velectronix. All Rights Reserved. This product description is original content. Unauthorized copying, scraping, or reproduction is prohibited. Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1