Mid Century End Post

Mid Century Cabinet Railing End Post Brass Railing End Posts provide a finished ending to railing. Rod inserts post just half-way.  Brass Rail may sag if a longer distance, than the recommended 10” – 16” spacing between posts, is used. Overall Height: 3-15/16" Top Diameter: 1" Height to Top of Rail: 3-5/8" Post Diameter: 3/8" Base Diameter: 1-1/4" 3 Screw holes in base Screw size: #4 x 1/2" Rod Hole: for ¼” Diameter Rod ** See: GUIDE for matching posts, rod and layout tips.** Matching Mid Century Posts Center Post Corner Post Wall Mount Post  Brass Railing Rod 36" Length Rod  72" Length Rod  Check attachment method to be sure it works with your design. ** See bottom of page for install information. ** Mid Century Posts are raw unfinished - solid brass. See link above for additional information. These post can be polished and lacquered for a long lasting shine or left to age naturally. If preferred, the brass can be colored using various procedures. Although we do-not offer this option, if you search online there are various brass coloring techniques and solutions available. Install on Wood Surface: Attach to surface top with wood screws: Layout brass railing Cut rods to appropriate lengths Loosely assemble rods and posts Mark screw location and drill necessary pilot holes for brass screws Slip rods in place.  Insert brass screws through holes in base of posts. Carefully screw them down into pre drilled holes.