Mi-T-M MH-0080-CM11 Propane Convection Heater – 80,000 BTU, 2,000 Sq Ft, 360°

MH-0080-CM11 Gas-Fired Convection Heater The Mi-T-M MH-0080-CM11 is a cylindrical convection heater that adjusts from 30,000 to 80,000 BTU and pushes heat in a 360-degree pattern over about 2,000 square feet. It needs no electricity and ships with a 15-foot hose and regulator to reach a cylinder placed outside the immediate work zone. MH-0080-CM11 Heat Output and Design A gas-fired convection burner radiates heat in all directions with push-button piezo ignition. Adjustable 30,000 to 80,000 BTU — dial output to the space 360-degree convection heat — warms a room evenly rather than one direction Heats ~2,000 sq ft — covers a ventilated shop or garage No electricity required — run anywhere a cylinder reaches 15-ft hose and regulator included — place the cylinder away from the heat Auto shutoff on flame loss — stops gas if the flame drops MH-0080-CM11 Applications and Environments Contractors and shop owners use the MH-0080-CM11 for even, quiet heat in ventilated garages, shops, and job sites. A 100-pound cylinder is suggested for longest run time (about 71 hours on low); it also runs on 40- or 20-pound cylinders. It weighs 13 pounds, is CSA C&US certified, and is warranted one year. Ventilate for propane use. Specifications Type Gas-Fired Convection Heat Output 30,000 - 80,000 BTU/hr Heating Area 2,000 sq ft Heat Pattern 360 degrees Fuel Propane (100 lb cylinder suggested) Consumption 1.4 / 3.7 lb/hr Run Time 71 / 27 hr (100 lb) Ignition Push-button piezo Electricity None Hose 15 ft with regulator Safety Auto shutoff on flame loss Net Weight 13 lb Dimensions 17.4 x 17.4 x 21.8 in Certification CSA C&US Warranty 1 year Ignition Type Push-Button Operating Hours (100 lb. Cylinder) 71 / 27 hours Operating Hours (40 lb. Cylinder) 29 / 11 hours Operating Hours (20 lb. Cylinder) 14 / 5 hours Suggested Cylinder Size 100 lb. Shipping Weight 17.00 lbs. Documents Mi-T-M MH-0080-CM11 Specification Sheet (PDF) Mi-T-M MH-0080-CM11 Owner's Manual (PDF)