Mi-T-M MH-0060-LM10 Propane Forced Air Heater – 40-50-60,000 BTU, 1,500 Sq Ft

MH-0060-LM10 Propane Forced-Air Heater for Shops The Mi-T-M MH-0060-LM10 runs on propane with adjustable output of 40,000, 50,000, or 60,000 BTU to heat about 1,500 square feet. One-touch electronic ignition starts it without matches, and it ships with a 10-foot hose and regulator for a 20-pound cylinder. MH-0060-LM10 Heat Output and Ignition A 1/10 HP fan moves 300 CFM and the heater draws under 1 amp on 120V. Adjustable 40,000 / 50,000 / 60,000 BTU — dial output to the space and cut propane use Heats ~1,500 sq ft — warms a garage, shop, or job trailer One-touch electronic ignition — start without matches or a pilot 10-ft hose and regulator included — connect to a 20-lb cylinder out of the box 300 CFM air output — pushes heat across the room Auto shutoff on power or flame loss — stops gas flow if the fan or flame drops MH-0060-LM10 Applications and Environments Contractors, farmers, and garage owners use the MH-0060-LM10 for spot heat in ventilated shops, garages, and job trailers. It runs on 120V at under 1 amp, is CSA (US) certified, weighs 15 pounds, and carries a one-year warranty. Provide ventilation for any propane heater. Specifications Type Propane Forced Air Heat Output 40,000 / 50,000 / 60,000 BTU/hr Heating Area 1,500 sq ft Air Output 300 CFM Fuel Propane (20 lb cylinder) Consumption 1.9 / 2.3 / 2.8 lb/hr Run Time 10.5 hr (20 lb) Ignition One-touch electronic Thermostat No Motor 1/10 HP, 120V/60Hz, <1 A Hose 10 ft with regulator Safety Auto shutoff on power/flame loss Net Weight 15 lb Dimensions 18.1 x 7.1 x 13.0 in Certification CSA (US) Warranty 1 year Hot-Air Flow 300 CFM AC Power 120V, 60Hz, Less than 1.0 Amp Motor Size 1/10 HP Required Cylinder Size 20 lb. Max. Operating Hours (Per Required Cylinder Size) 10.5 hours Adjustable Thermostat No Adjustable Height Angle Yes Hose & Regulator 10 ft. Shipping Weight 19.00 lbs. Documents Mi-T-M MH-0060-LM10 Specification Sheet (PDF) Mi-T-M MH-0060-LM10 Owner's Manual (PDF)