RED 12" X 200' Crown Roll Leaf Foil MG39-740

Metallized hot stamping foil developed for application to T-shirts. This series is available in silver, gold, various metallic colors, as well as some multi-color patterns and holographic patterns. Typical application is using clamshell type heat presses. The T-shirt or fabric material must be pre-printed with an appropriate adhesive. Foiled shirts typically take up to 3 to 5 washes when using cold water and mild detergent. Hang to dry. Foiled shirts should not be ironed or dry-cleaned. Other factors such as adhesive used and application conditions affect the washability of the product. Release Characteristic Medium Coverage Medium to Large Application Temperature: 300 - 325F - Typical clam shell application (150 - 165C) These temperature ranges serve only as a start-up reference. Proper temperature setting will depend on several other application conditions such as type of machinery and tooling, coverage, application speed and pressure, and other factors. T-Shirt Foil Washing Instructions Recommended Washing Conditions: 1. Machine wash - Delicate cycle 2. Wash garment inside out 3. Washer temperature setting: Cold / Cold 4. Detergent: use Typical (All, or Tide w/Bleach Alternative) 5. Drying: Line or air dry only Under these conditions, T-shirt foils should hold up to 5 wash cycles. A 15-20% loss of gloss or color brilliance is typical, even after the first wash, but foils should stay relatively intact. Disclaimer: The information here in is based on typical wash data available to us and is presented in good faith. Values that are presented are intended only as a source of information and given without guarantee and do not constitute a warranty. No guarantee or warranty is given as to the accuracy, reliability or completeness of the information herein. Since the conditions under which the product and/or this information may be applied are beyond our control, we can assume no liability for the results of the application. No representation or warranty regarding the compliance of the foil product with the information provided herein can be given. This information does not release the customer from their own liability for care in examination of the product for their intended use. Purchasers should independently determine, prior to use, the suitability of this material for their specific application. No warranty, expressed or implied, is given.