MEYLE Front Lower Compliance Link Right Tesla Model 3 & Model Y

Description Restore the handling and stability of your Tesla's front suspension with the MEYLE Front Lower Compliance Link, designed for the right-hand side of the front suspension in the lower rear position. Also commonly referred to as a front lower control arm, compression rod, or compliance link, this suspension component helps control fore-and-aft wheel movement while the integrated bushing helps absorb road impacts and isolate noise, vibration, and harshness. This MEYLE replacement arm is designed for applications using Tesla OE reference 1044359-00-A. It provides a high-quality replacement for a worn or damaged factory component and can help restore proper suspension response, steering feel, and front-end stability. Worn control-arm bushings can contribute to front-end clunking, knocking, loose steering, wandering, or excessive suspension movement during braking and acceleration. Replacing the complete arm assembly provides a straightforward way to address these common suspension wear symptoms. Key Features High-quality replacement from MEYLE HD Designed for the right-hand/passenger side Front suspension — lower rear position Replacement for Tesla OE 1044359-00-A Complete suspension arm assembly Integrated suspension bushing Helps restore proper front suspension geometry Helps control fore-and-aft wheel movement Helps address clunking and knocking caused by worn suspension components Direct replacement design Sold individually Specifications Specification Details Brand MEYLE HD Product Type Front Lower Compliance Link Suspension Position Front Mounting Position Lower Rear Side Right / Passenger Side MEYLE Part Number 1044359-00-A Tesla OE Reference 1044359-00-A ECS Part Number ES#5443839 Construction Complete Control Arm Assembly Bushing Included Quantity 1 Installation Position Front Right Vehicle Fitment Tesla Model 3 Model 3 — applications using OE part number 1044359-00-A Approximately 2017–2023 applications Tesla Model Y Model Y — applications using OE part number 1044359-00-A Approximately 2020+ applications, depending on production date and suspension revision Important Fitment Note Tesla has used different revisions of front suspension components throughout Model 3 and Model Y production. Verify that your vehicle uses Tesla OE part number 1044359-00-A before ordering. For later-production vehicles or vehicles with updated suspension components, VIN or original-part-number verification is recommended. This listing is for the RIGHT / PASSENGER SIDE front lower compliance link. What Does the Front Lower Compliance Link Do? The front lower compliance link is an important component of the Tesla Model 3 and Model Y front suspension. It helps locate the front wheel assembly and control fore-and-aft movement during acceleration, braking, cornering, and impacts. The large suspension bushing allows controlled movement while helping isolate road noise and vibration. When the compliance link or its bushing becomes worn, drivers may experience: Clunking or knocking from the front suspension Creaking or unusual suspension noises Loose or vague steering feel Vehicle wandering Excessive wheel movement during braking Increased suspension movement over bumps Uneven or accelerated tire wear Changes in front-end alignment Replacing a worn compliance link can help restore the intended suspension behavior and steering response. Why Choose MEYLE HD? A HEAVY-DUTY UPGRADE MEYLE HD isn't simply a replacement part. It's a technically enhanced alternative. MEYLE HD stands for High Durability and is designed around reinforced or improved components intended to provide greater durability than standard replacement designs. MEYLE states that its HD parts are developed to improve durability, reliability, and service life.   Reinforced Construction HD components are designed with durability in mind for suspension applications subjected to continuous loads and movement. Precision Manufacturing MEYLE says its suspension components are engineered and quality-tested to meet its manufacturing standards and OE-compliant fit requirements. Long-Term Durability Long-lasting manufacturing and materials. This replacement compliance link is designed around the original mounting locations and geometry for applications using Tesla OE reference 1044359-00-A. It is an ideal replacement when the original right-side compliance link is worn, damaged, or showing signs of bushing deterioration. Complete Suspension Arm Assembly This MEYLE component provides a complete replacement arm assembly, rather than requiring the original arm to be rebuilt with a separate bushing. Replacing the assembly can simplify suspension repairs by addressing the arm and integrated bushing together. Common Symptoms of a Worn Compliance Link A worn front lower compliance link may produce noticeable changes in the vehicle's behavior. Look for: Front-End Clunking Knocking or clunking noises may occur when driving over bumps or uneven pavement. Loose Handling Excessive bushing movement can make the steering feel less precise. Braking Movement A worn compliance bushing can allow unwanted fore-and-aft movement of the wheel during braking. Uneven Tire Wear Excessive suspension movement can contribute to alignment changes and accelerated tire wear. Suspension Noise Cracked, deteriorated, or worn bushings may produce creaking, popping, or knocking sounds. Installation Professional installation is recommended. After replacing a front suspension control arm or compliance link, a four-wheel alignment is strongly recommended. Replacing suspension components can affect wheel alignment, and proper alignment helps ensure the vehicle tracks correctly while minimizing uneven tire wear. Always follow the manufacturer's recommended installation procedures and torque specifications. Important Installation Note Control-arm bushings should be tightened according to the manufacturer's specified procedure and ride-height requirements. Improperly pre-loading a bonded suspension bushing can reduce service life. A qualified technician should perform the installation if you are unsure of the correct procedure. Important Notes Fits the right/passenger side only. Front suspension, lower rear position. Replacement for applications using Tesla OE 1044359-00-A. Verify the OE part number before ordering. Tesla has used multiple suspension component revisions across Model 3 and Model Y production. Sold individually. Left and right sides use different part numbers. A professional four-wheel alignment is recommended after installation. Always verify fitment by VIN or original part number when uncertain. Product Highlights OE REPLACEMENT Designed to replace the factory front lower compliance link on vehicles using OE reference 1044359-00-A. RIGHT-HAND APPLICATION Specifically designed for the passenger side of the front suspension. COMPLETE ASSEMBLY Provides the replacement suspension arm and integrated bushing as one assembly. RESTORE SUSPENSION PERFORMANCE Helps address excessive suspension movement, clunking, knocking, and loose front-end feel caused by worn components. MEYLE QUALITY A high-quality aftermarket replacement from MEYLE for Tesla Model 3 and Model Y suspension applications. What's Included 1 × MEYLE Front Lower Compliance Link Right-hand / passenger-side application Integrated suspension bushing