MDI Pump Duty Mechanical Float Switch - Septic Pump Float

Pump Duty Float Switch - 10 Foot - Normally Open - Wide Angle These high quality float switches are designed for pump duty loads. The float switch is as normally open or pump down (circuit is complete when the float is elevated). The float cord is intended to be attached to a vertical pipe a band clamp, cable tie or tether clamp. As an option the float can be installed with a cable weight as the pivot point. This float has skived ends, where the insulated wire leads inside the cable are intended to be wired into other system components inside a junction box. Competitor Crosses SJE Rhombus Model 1002712 (10PMDWOP SJE PumpMaster® Pump Switch) Conery MFG Model 2900-B3S4-10 Ratings 13 AMP @ 120/240 VAC 1/2 HP @ 120/240 VAC 58.8 LRA Operation Normally Open (Pump Down) Operating Angle Wide Angle Float Hanging Down Contacts are Open Contacts Close @ 45° Above Horizontal Contacts Open @ 45° Below Horizontal Cord 10' Flexible 16 Gauge 2 Conductor SJOW (UL & CSA) CPE (Chlorinated Polyethylene) Jacketed Housing 2.625" Dia x 4.625" Float Material ABS (Acrylonitrile Butadiene Styrene) Specific Gravity 0.6 Operating Temperature Up to 180ºF (82ºC) Pump Range 7" to 28" adjustable based upon length of cable beyond clamp / tether Float Switch Mechanical (Contains no mercury) UL 508 listed Warranty 1 Year   Made in USA E-93774 LR-41198