Rain Bird - MDCFTEE Easy Fit Tee

Complete system of compression fittings and adapters for all tubing connection needs in a low-volume system. Reduces inventory costs: Multi-diameter compression fittings work with a wide range of 1/2" polyethylene tubing sizes (0.630" to 0.669" or 16mm - 17mm outside diameter). Saves time and effort: 50% less force is required to connect tubing and fittings versus competitive compression fittings. Adapters swivel for easy installation. Provides increased flexibility: Just three Easy Fit Fittings and five Easy Fit Adapters are needed to make over 160 combinations of connections, accommodating countless installation and maintenance situations. Easy Fit Compression Fitting System - 1/2 in. Male Pipe Thread Adapter Faster and easier to install—requires up to 50% less force to install tubing, making your installation project faster and easier Great for maintenance and retrofitting existing systems Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from .630" to .669" (16mm to 17mm) The eight components of the Easy Fit System (3 Fittings and 5 Adapters) can be built into over 160 different configurations Not compatible with Rain Bird XBS or XT700 tubing Easy Fit Adapters are not barbed fittings; they are to be used only with Easy Fit Compression Fittings Easy Fit Install Instructions: Step 1 Select an Easy Fit Compression Fitting—either a coupling, an elbow or a tee. Step 2 Select the Easy Fit Compression Adapter to connect the fitting to any 1/2" (12,7 mm) or 3/4" (19,05 mm) male- or female-threaded component (for example, a threaded PVC riser). Step 3 After selecting the right Easy Fit Compression System components, simply assemble the two using little effort. Step 4 Easily insert any manufacturer’s drip tubing from .630" to .669" O.D. (16 mm to 17 mm) into the fitting and connect onto the threaded component. Simple. Fast. Done. Specifications: Flow Control: 0-6 GPM Pressure Rating/Range: 0-60