Ceramic Shine - MaxPro

MaxPro Ceramic Shine is a nano spray ceramic coating of high performance and extreme ease of application. Its main purpose is to protect the paint and other glazed surfaces of cars, motorcycles, aircraft, boats, etc. performing its maintenance and reviving the original benefits of the post glazed surface, thus prolonging its life, and is also a ceramic sealant to be applied directly on the surface (painting, etc.) of very high strength, brightness, water repellency and smooth and soft touch.   Developed with the most modern nanotechnology provides for up to 6 months to the coated surface extra protection against everyday aggressions such as resistance to UV rays, high temperatures, corrosion and oxidation, protection against tree sap and bird droppings, water repellent effect, and finishing with a deep shine and soft touch. MaxPro products are not removed in the wash. The coating forms a highly stable chemical bond with the treated surface and is removed only by chemical or mechanical/abrasive action. MaxPro Ceramic Shine is recommended for maintenance of all MaxPro coatings and other SiO2, TiO2 and Graphene based coatings.   HOW TO USE: Spray the product on an area about 50x50cm and with the aid of a microfiber spread it in smooth and uniform crosswise movements. Then use a new microfiber and shine it. The total cure occurs in only 2 hours. OBS: The surface must be polished, decontaminated with isopropyl alcohol solution and at room temperature; The entire process must take place protected from the sun, rain and suspended particles; Avoid contact with water for the first 24 hours. If contact occurs, remove the excess with a clean, soft microfiber towel, without rubbing. AVERAGE YIELD: 15 to 20 car body applications.   PRECAUTIONS FOR USE: PRODUCT FOR PROFESSIONAL USE ONLY. KEEP OUT OF REACH OF CHILDREN AND PETS. DO NOT INGERATE. PPE REQUIRED. Avoid contact of product with eyes, skin and clothes during manipulation. Keep the product in its original packaging. Do not reuse packaging.   FIRST AID: In case of contact with eyes or skin, wash immediately with running water for 15 minutes. If symptoms persist consult a physician taking with you the package or label of the product. In case of ingestion, do not induce vomiting, consult a physician immediately. In case of inhalation or aspiration, go to a ventilated place and if there are signs of intoxication, seek a doctor. Emergency phone: USA - 911.    COMPOSITION: Dimethylpolysiloxane, Aliphatic Hydrocarbons and Solvent - CAS 63148-62-9.