Mattos Designs MD1500 Baldrick8 RTR Pixel Controller - Mconnect

Not every build needs 16+ outputs. The Mattos Designs MD1500 Baldrick8 delivers professional-grade pixel control in a compact, single-PSU configuration — purpose-built for mid-size trees, props, roofline runs, and secondary zones in larger show setups. Built on the Baldrick8 board, housed in the Mattos Designs MD1500 weather-resistant enclosure, and pre-wired with Mconnect Pro Series pigtails, this controller arrives fully assembled, tested, and ready to run. ✓ Free domestic ground shipping included   ✓ 1-year limited warranty Right-Sized Power for Your Display With 6,000 pixel capacity and 350 watts of clean Mean Well power, the MD1500 Baldrick8 is the natural choice for displays that don't need the full capacity of our 17-port controller. Run a mid-size mega tree, power a dedicated prop zone, or use it as a secondary controller alongside a Baldrick17 in a larger show setup — the Baldrick8 fits wherever you need reliable, professional pixel control without oversizing your build. Purpose-built for the MD1500 enclosure ecosystem with Mconnect connectivity and 2-color PETG printed cable ID clips numbered 1–8 so every output is labeled and organized from day one. What's Included Baldrick8 controller board 12V Mean Well LRS-350-12 PSU (350W) Mattos Designs MD1500 weather-resistant enclosure Mconnect pigtails pre-installed on all 8 outputs 2-color PETG cable ID clips numbered 1–8 for output identification Waterproof RJ45 bulkhead coupler with dust cap and interior storage mount 3' SJTW 16/3 outdoor-rated power cord PSU terminal cover 3D printed PETG backer plate with integrated Baldrick board standoffs Stainless steel hardware throughout Key Features Pixel Control 8 outputs — up to 750 pixels per port at 40 FPS Total capacity: 6,000 pixels Compatible with WS281x, RGBW, UCS1903, SM16703P, UCS2904, and more Individually fused 7.5A outputs with LED fault indicators per port Power Management Single Mean Well LRS-350-12 — 350W, 12V 10 AWG high-temp silicone wire for safe high-current operation PSU terminal cover for safe, protected AC connections Connectivity Waterproof RJ45 bulkhead coupler — connect your network cable without opening the enclosure. Dust cap protects the port when not in use. Includes a 3D printed PETG interior storage mount that secures the coupler body inside the enclosure lid during off-season storage — no loose parts to get lost. Single 10/100 Ethernet port Supports E1.31, sACN, DDP, Art-Net protocols Direct xLights integration — push configuration directly from xLights 2024.10 and later. No FPP license required. Static IP mode — assign a fixed IP address without a DHCP server for reliable field deployment Enclosure & Weatherproofing Mattos Designs MD1500 high-impact thermoplastic alloy enclosure with self-latching hinged cover, weather-resistant seal, and integrated mounting system Nylon cable glands route all pigtail cables cleanly out of the enclosure Stainless steel hardware throughout for corrosion resistance ⚠ Mounting requirement: The MD1500 enclosure must be mounted vertically with pigtails exiting downward to maintain its weather-resistant rating. Horizontal or inverted mounting is not recommended and may void the weather resistance. Build Quality 3D printed PETG backer plate with integrated Baldrick board standoffs — purpose-built for the MD1500 interior dimensions 3' SJTW 16/3 outdoor-rated power cord — properly sized for the load, rated for outdoor use Every unit fully wired and tested before shipment Technical Specifications Controller Board Baldrick8 Pixel Outputs 8 ports — up to 750 pixels/port @ 40 FPS (6,000 total) Pixel Types WS281x, RGBW, UCS1903, SM16703P, UCS2904 and more Ethernet Single 10/100 LAN port (waterproof bulkhead coupler included) Power Supply Single Mean Well LRS-350-12 (350W / 12V) Output Fusing 7.5A per output with LED fault indicator Protocols E1.31, sACN, DDP, Art-Net Software xLights (direct config push 2024.10+), FPP compatible Enclosure Mattos Designs MD1500 weather-resistant thermoplastic Enclosure Dimensions 12.25" H × 12" W × 5.25" D (outer) Mounting Vertical mount required for weather resistance Connectors Mconnect (pre-installed, 8 outputs) Cable ID 2-color PETG printed clips numbered 1–8 Power Cord 3' SJTW 16/3 outdoor-rated Shipping Free domestic ground shipping Warranty 1-year limited warranty; PSU covered per manufacturer Important Notes Mounting Mount vertically with cable glands facing downward to maintain weather resistance. Do not mount horizontally or inverted. Warranty Every MD1500 Baldrick8 RTR includes a 1-year limited warranty covering assembly workmanship and components. Mean Well power supply is additionally covered per manufacturer warranty terms.