WalkingPad MATE-FB1 Folding Weight Bench

Folding Weight Bench WalkingPad MATE-FB1 Folding Weight Bench The MATE-FB1 is rated to 880 lb on a reinforced steel frame built from 50 × 50 mm tube with a 1.5 mm wall — roughly 16 gauge. That is the number that decides whether a bench feels planted under a heavy dumbbell press or flexes when you set up. Seat and backrest adjust through incline, flat and decline, so presses, rows, shoulder work and core movements all run off one piece of equipment. When the session ends, one pull folds it down to 15.59" × 26.37" × 10.23" — around 80% less storage space than it occupies open. A built-in strap carries it to a closet or behind a door. Assembly takes 15 minutes and the tools come in the box. Weight Capacity 880 lb Reinforced steel frame Positions Incline · Flat · Decline Seat and backrest adjust Folded Size 10.23" thick 15.59" × 26.37" × 10.23" Assembly 15 min Tools included 50 × 50 mm steel tube One-pull folding Built-in carry strap The Build Four details that decide whether a folding bench is worth training on. Folding benches usually give up rigidity to save space. The FB1 spends its engineering on the frame and the hinge, then adds the cushion and the anchor that make long sets bearable. 🏗️ Reinforced Steel Frame 50 × 50 mm steel tube with a 1.5 mm wall, approximately 16 gauge, carrying a rated 880 lb. Wall thickness is the spec most benches hide, and it is what keeps the frame from flexing under you at the bottom of a press — the moment when a bench either holds or tells you it was built to a price. 880 lb · 1.5 mm wall 📐 One-Pull Folding A single pull collapses the bench to 15.59" × 26.37" × 10.23", cutting its storage footprint by up to 80%. The point is not the trick — it is that a bench you can fold in one motion actually gets put away, which is the difference between a home gym and a living room with equipment in it. Up to 80% Less Space 🛏️ Multi-Layer Cushion The pad uses a multi-layer construction that balances give against support, so your shoulder blades stay set instead of sinking. The surface is sweat-resistant and wipes clean, which matters on a bench that lives in an apartment rather than a gym with a towel policy. Sweat-Resistant 🦶 Padded Foot Anchor Foam-padded rollers hold your feet during decline and core work, so you can control the eccentric instead of bracing to stay on the bench. Anchored feet are what turn sit-ups on a bench into a loaded movement rather than a balancing exercise. Decline & Core Work Why Athletes Choose This A full bench that disappears between sessions. 🏋️ Rated to 880 lb Reinforced steel 📐 Incline, flat and decline Multi-angle ⚡ Folds with a single pull Up to 80% less space 📦 Stores at 10.23 inches thick Closet or corner 💧 Sweat-resistant cushion Wipes clean 🦶 Padded foot anchor for core work Decline sets 🎒 Built-in carry strap Folded transport 🔧 15-minute assembly Tools included Built For Home Training Where the FB1 earns its place in a small room. Adjustment One bench, three angles, most of a strength program Seat and backrest both adjust, which is what separates a real adjustable bench from a flat pad with a hinge. Incline covers upper-chest and shoulder pressing. Flat handles your heaviest press and dumbbell rows. Decline opens up lower-chest work and anchored core movements. The adjustment locks quickly between sets, so moving from incline press to flat press does not cost you the rest interval you planned. Incline, flat and decline positions Seat and backrest adjust independently to multiple angles Supports presses, rows, shoulder work, dumbbell training and core Multi-Angle Quick Lock Storage From 43.5 inches long to a 10-inch slab Open, the FB1 measures 43.5" × 15.59" × 19.09". Folded, it is 15.59" × 26.37" × 10.23" — a footprint that fits behind a door, under a bed, or in the gap beside a wardrobe. That is up to 80% less storage space than the bench occupies in use. A built-in strap means you carry it there in one hand instead of dragging it, which is the practical reason a folding bench stays folded rather than staying out. Unfolded: 43.5" × 15.59" × 19.09" (1105 × 396 × 485 mm) Folded: 15.59" × 26.37" × 10.23" (396 × 670 × 260 mm) Integrated carry strap for moving it folded One-Pull Fold Carry Strap Frame & Cushion Where the 880 lb rating comes from The rating is a function of the steel. The FB1 uses 50 × 50 mm reinforced steel tube with a 1.5 mm wall — approximately 16 gauge — which is what carries a rated 880 lb without the frame working under load. On top of it sits a multi-layer cushion that gives enough to be comfortable through a long set without letting your torso roll. The cover is sweat-resistant and wipes down, so the bench holds up to home use and light commercial duty. 50 × 50 mm reinforced steel tube, 1.5 mm wall (approx. 16 gauge) 880 lb rated weight capacity Multi-layer, sweat-resistant cushion 880 lb Rated Light Commercial Full Spec Sheet Specifications Frame & Build Product Type Multi-functional strength training bench Usage Home gym / light commercial use Frame Material Reinforced steel Steel Tube Size 50 × 50 mm Wall Thickness 1.5 mm / approx. 16 gauge Weight Capacity 880 lb Dimensions & Weight Unfolded Size 43.5 × 15.59 × 19.09 in (1105 × 396 × 485 mm) Folded Size 15.59 × 26.37 × 10.23 in (396 × 670 × 260 mm) Packaging Size 27.57 × 17.37 × 10.67 in (710 × 440 × 270 mm) Gross Weight 30.25 lb (13.7 kg) Adjustment Positions Incline / flat / decline, multi-angle adjustable Foot Anchor Padded Folding One-pull, with built-in carry strap Colors Black; Gray & Pink Setup Assembly Required Yes Tools Included Yes Installation Time 15 minutes Warranty 1 year, optional extension available Questions Frequently Asked Questions How much weight does the bench hold? + The FB1 is rated to 880 lb. The frame is reinforced steel built from 50 × 50 mm tube with a 1.5 mm wall, approximately 16 gauge, and is rated for home gym and light commercial use. What positions does it adjust to? + Incline, flat and decline. Both the seat and the backrest adjust to multiple angles, which covers presses, rows, shoulder work, dumbbell training and core movements on one bench. How small does it fold, and can I carry it? + Folded it measures 15.59" × 26.37" × 10.23", roughly 80% less storage space than it takes up open (43.5" × 15.59" × 19.09"). It folds with a single pull and has a built-in carry strap for moving it once folded. Does it need assembly? + Yes. Assembly takes about 15 minutes and the required tools are included in the box. What colors is it available in? + Two: Black and Gray & Pink. Both are the same bench at the same price and specification — the only difference is the finish. Will the cushion hold up to sweat? + The cushion cover is sweat-resistant and wipes clean. Underneath, the pad uses a multi-layer construction that balances give against support through long sets. What warranty comes with it? + A 1-year warranty, with an optional extension available.