Masonry Drill Bit

Use one of these Masonry drill bits to create pilot holes into hard earth to help the deployment of your longer GroundGrabba Pro I or Pro II. What You Get Your choice of: 1x 1/2" x 12"Masonry Drill with HEX shaft / shank 1x 1/2" x 24"Masonry Drill with HEX shaft / shank 1x 1/2" x 24"Masonry Drill with SDS shaft / shank Specifications 12" Model 1/2” x 12″ 1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible. Made of hardened steel with a tungsten tip. Speed Hex clip in style shank Weight: 0.129lbs Dimensions: 1/2 × 12 in  24" Models Hex Speed Shank 1/2” x 24″ 1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of your GroundGrabba Pro, Pro I or Pro II possible. Made of hardened steel with a tungsten tip. Speed Hex Clip in style shank Weight: 0.26lbs Dimensions: 1/2 × 24 in  SDS Shank  1/2” x 24″ 1/2″ Masonry Drill Bit to pre-drill holes into very hard ground to help make the              insertion of GroundGrabba Pro, Pro I or Pro II possible. Made of hardened steel with a tungsten tip. SDS shank   Weight: 0.26lbs Dimensions: 1/2 × 24 in  Additional Information If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro, Pro I or Pro II into the ground then try pre-drilling the ground using this 1/2″ x 24″ masonry drill bit. You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard.  Perhaps you may also need to widen the hole too. Video Disclaimer ⚠ Caution: ❌  Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water.  ❌  Do not use GroundGrabba products for any other purpose other than ground anchoring. Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders.  When using motorized drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products.  Only use GroundGrabba products for their intended purpose. Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury.  Clear the hole you are drilling often during the process. Use a good quality high torque drill or hammer drill. Some grounds will be impenetrable.  Warranty Masonry Drills come with a twelve month manufacturer defect replacement warranty *conditions apply