
$44.90
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The Mark 3 DIY cable is for anyone who already has a 48V power source and wants to tie the ZERO BREEZE Mark 3 straight into it. One end is a D20 connector that plugs into either the Mark 3 air conditioner or the Mark 3 Battery; the other end finishes in eye terminals that bolt onto the positive and negative electrodes of a lithium battery. There is no converter in between, which is what separates this cable from the 12V to 48V converter: the DIY cable assumes your bank is already at the voltage the Mark 3 wants. This 1 m version is built from 16 AWG wire with a rated current of 10A. ZERO BREEZE's requirement for running the air conditioner this way is a source that can output more than 600W, and the battery and wiring must safely carry at least 10A continuously. For reference, the Mark 3 air conditioner is rated at 500W input with a working voltage range of 38V to 58.5V, and ZERO BREEZE cites roughly 4 to 16 hours of runtime from a 48V 50Ah bank of around 2400Wh depending on which mode you run. The same cable can be used the other way around, feeding a Mark 3 Battery from your own 48V source rather than powering the air conditioner directly. Both named uses are Mark 3 equipment: ZERO BREEZE lists this cable for the Mark 3 air conditioner and the Mark 3 Battery, and the D20 end is a Mark 3 connector. They do not publish compatibility with the 24V Mark 2 units, so do not assume the cable crosses between generations without confirming it first.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$44.90