Premium Marine Topside Primer

OUR TOPSIDE PRIMER IS A ONE-COAT WONDER! The substantial solids in our Topside Primer create a coating that covers completely, in a single application. You actually want to paint it on thinner so the solids can fill any small surface imperfections and dry properly. A thinner coat is also more pliable and able to flex without lifting. When it’s dry, just sand lightly, wipe clean, and apply your topside finish. It doesn’t get any easier. Just remember to spend a full five minutes stirring it well before applying, so you get more solids off the bottom of the can and onto your brush or roller. Or into your sprayer. UNDER OR OVER, THIS PRIMER GOES ABOVE AND BEYOND This versatile topside primer is a solid, easy-sanding undercoat for both one and two-part polyurethane or enamel paints. If you need to hide larger imperfections first, use TotalFair epoxy fairing compound, then overcoat with Topside Primer before applying your topcoat. It’s the recommended primer for our Wet Edge topside paint, TotalTread non-skid deck paint,and TotalGold marine paints. Compared to the competition, it goes on thinner, covers more area, is more flexible, requires fewer coats, and dries faster. PREMIUM TOPSIDE PRIMER DETAILS High-solids formula provides superior coverage as an undercoating for polyurethane and enamel topside paints. One-part marine topside primer is easy to apply, dries fast, and cures to a hard finish that won’t lift or crack. Lead-free and chromate-free Apply on wood, fiberglass, gelcoat, and over previously painted materials above the waterline via brush, roller, or spray. A single coat is sufficient for most applications, even over bare wood. Sandable in 60-90 minutes @ 65°F. Available in White and Gray, in Quart and Gallon sizes Not sure how much marine primer you’ll need? Try our simple paint calculator to determine how much your project will require.