Marine Epoxy Fairing Compound

#4118 Marine Epoxy Fairing Compound is a smooth, creamy paste system for fairing surface imperfections on composites, wood, and primed metal parts, boasting excellent bonding during cure. This tough Epoxy Fairing Compound can be used to fill voids and provides a smooth transition in offset or stepped areas. It is also specially formulated for easy sanding and is moisture resistant, so the cured surface is blush-free and won't gum sandpaper during finishing. This compound comes as a two-part kit and is mixed in an easy 1:1 ratio. Resin is off-white and hardener is gray, making it easy to ensure complete mixing. Once a complete mix is achieved, the creamy paste spreads easily onto damaged or rough areas to create a smooth, cosmetic surface. #4118 Epoxy Compound cures to be slightly flexible, which helps to resist cracking under stress or vibration for thin layers. However, if necessary, it can applied up to 1-1/2 inches thick—special "wet" spreadable viscosity prevents nearly any sagging, even at elevated temperatures. Pot Life: 85-95 minutes Mix Ratio: 100:65 (by weight); 1:1 (approximate, by volume) Cures at room temperature—no heat required for full cure Allow 4–5 hours (only) between multiple layers (at 77F) Finish sand in 16–18 hours Lightly sand before applying primer/paint