MagPole 18ft.

Use the Clik-Clik Calculator to determine which product you need to complete your installation: CLIK-CLIK CALCULATOR    The MagPole, MONSTER MagPole Lime and the One Button Pole are extension poles with the standard acme thread, and for ease of use, are push button operated. Your choice of MagMover threaded onto an extension pole will lift the ClikMagnets to metal on the ceiling…to hang display items while your feet remain safely on the ground. The MagPole is a sturdy five section, 4 push button telescoping extension pole with a fiberglass handle. The end tip has the acme thread. The push buttons make it easy to extend and close the MagPole. No twisting of the sections. It closes to 5ft 8 inches for easy eye-level loading of the ClikMagnets onto the attached MagMover. This length also fits into most cars for transport to the work site. Fully extended, the MagPole opens to 18ft (5.5m). Using the reach of your body height, the fully extended MagPole can reach the metal on ceilings with a height of 23 ft. The MagPole weighs 7.5 pounds. The MagPole is always extended and closed while in a vertical position with the base/weight on the ground. It feel lighter as it is extended and is only lifted a short distance to make the attachment of the ClikMagnets. Very little work/lifting is required. How to use the MagPole to install items from the metal on a ceiling. With the MagMover threaded onto the end of the MagPole, hold the MagPole in a vertical position, with the base resting on the floor. Place the ClikMagnets (attached with LoopLine to your item) onto the MagMover. Keeping the base on the floor and the MagPole vertical, extend the sections to the desired height. Lift the MagPole and let the ClikMagnets adhere to the metal. Your item is hung. With the Magpole still in a vertical position, set the base on the floor and gently close each opened section. Repeat for the next installation. How to use the MagPole to remove the ClikMagnets and your items from the metal on a ceiling. With the MagMover threaded onto the end of the MagPole, hold the MagPole in a vertical position while resting the base on the floor. Rotate out the corkscrews Keeping the base on the floor and the MagPole vertical, extend the sections to the desired height. Standing close to the display item, vertically lift the MagPole/MagMover the short distance to put a corkscrew FULLY into the ring of each ClikMagnet holding the display. The curls of the corkscrew will capture the ring of the ClikMagnet . With the Magpole still in a vertical position, set the base on the floor and gently close each opened section. Remove the ClikMagnets with their attached LoopLine. They are ready for re-use and installation of the next display. How to use the MagPole to guesstimate the required length of line between the ceiling and top of your display item. While in a vertical position, extend the MagPole to touch to ceiling. Visualize on the MagPole, where the top of your item would be when hanging from the ceiling. Return the base to the floor and gently lie the extended MagPole on the floor. Measure the distance between the visualized spot on the MagPole and the tip of the MagPole. This is the length of line required to hang your item at the desired height above the floor and from the ceiling.