Magnetic Fluid Bluetooth Speaker with Decompressor, Fingertip Control, and Colorful Lighting Effects

SPECIFICATIONS magnetic fluid bluetooth speaker   Power on/off: Press and hold the back switch button for 3 seconds to perform power on/off (the magnetic fluid will move rhythmically according to external sound) Connect Bluetooth: When turned on, the speaker is in Bluetooth pairing mode, and the Bluetooth link name on the phone or computer is "VENOM BALL" Playing music: The magnetic fluid will dance to the rhythm of the music, adjusting the volume to control the overall jumping intensity of the magnetic fluid. Operation instructions 1. When turned on, the default mode is Bluetooth connection mode. 2. If no USB flash drive or AUX input is inserted, the "" key will not work, 3. If a USB flash drive is inserted or an AUX signal is connected, touch the "" key to switch the input audio source. If there are two VENOM BALL speakers, long press the "" button on either speaker for 2 seconds before connecting Bluetooth, USB or AUX signals to activate TWS pairing mode and connect the two VENOM BALL speakers to form stereo sound. 1. Short touch can lower the volume. 2. Long press the previous song. 1. Short touch can increase the volume. 2. Press and hold a song. 1. Short touch once: pause, touch again: play 3. Long touch to disconnect Bluetooth connection. If Bluetooth is occupied by the device, long touch again to reconnect. 1. When there is no music playing or when the music is paused. 2. With a short touch, the built-in microphone will pick up external sounds, and the magnetic flow will jump with the rhythm of your speech or ambient sound. 3. Touch again, and the magnetic current will stop jumping. 1. Tap to lock the background lighting color, and touch again to automatically rotate the background lighting color. 2. Long touch can infinitely adjust the brightness of the light (dim/brighten). [Product Specifications] 1. Output power: 30 watts 2. 15 watt full frequency speaker: x2 3. Frequency response: 65Hz-13.5kHz 4. Signal to noise ratio:>80dB Bluetooth version: 5.3 6. Bluetooth name: VENOM BALL 7. Input voltage: Type-C 5V2A 8. Audio input: Bluetooth, AUX, USB flash drive 9. Battery capacity: 7.4V 4500mAh 10. Working temperature: -8-35 ° C 11. Size: Diameter 15cm, Height 25cm 12. Net weight: 1.8kg [Battery life] Built in 4500mAh large capacity battery, with a range of about 8-10 hours depending on external conditions. If it is placed on a desktop for daily use, it is recommended to plug it in for use. How long does it take to fully charge The built-in battery takes about 3.5 hours to fully charge. [Power indicator light description] Low battery warning tone: NO Power Red: Charging (in shutdown state, fully charged in about 3.5 hours) Green: fully charged Why do magnetofluids stick to walls Magnetic fluid belongs to nanoscale small particles, which are prone to sticking to the wall at high temperatures or for long periods of inactivity. After restarting and running for a few days, the sticking to the wall will gradually slow down. After running for a period of time, it will weaken and disappear, and you can observe it for another period of time. Is the product toxic Magnetic fluid and transparent carrier fluid are both safe and non-toxic, and can be used with confidence. But if the dirt is difficult to clean on the hands (only for viewing, not for consumption) How many colors are there for lighting There are tens of thousands of colors in the lighting, and it has a seamless gradient. When you see a favorite color, you can click the button to lock/unlock the current color Adapter specifications The parameters of the power plug need to meet 5V2A to function properly [Environmental Requirements] The product is only suitable for transportation and use within -8~35 ℃. Why is my magnetic fluid state different from others' ① The density of magnetic fluid actually changes during peristalsis ② Magnetic fluid will undergo emulsification reaction during the peristaltic process, and the reaction speed also varies ③ The sound of the user's usage environment is different, and the frequency of magnetic fluid peristalsis is also different The above three variables will make the state of each small venom rich and varied. Magnetic fluid aging Magnetic fluids move in aqueous solutions for a long time, inevitably leading to emulsification reactions. Therefore, magnetic fluids gradually age (conjunctiva and rigidity), which can last for approximately 1-3 years. Continuous power supply and appropriate temperature can slow down the aging rate of magnetic fluids. Can I put it in the car The vast majority of electronic products cannot withstand high temperatures of around 80 degrees, so it is not recommended to use them in cars as there may be safety hazards Precautions for use 1. The audio system is equipped with a glass container, please make sure to place it upright and stable during use to avoid falling to the ground. 2. Do not disassemble or modify the audio system to avoid electric shock or damage. 3. Please keep the speaker away from water to avoid electric shock or damage. 4. Do not place the speaker near heat sources such as radiators, stoves, or other appliances that generate heat. 5. Use the recommended power supply and charger. Keep accessories and packaging materials out of reach of children to prevent choking hazards. Please do not use in cold or icy environments, and avoid prolonged use in hot environments. Do not use in the car, especially in direct sunlight. Please do not add water to the container. Magnetic fluid is professionally prepared, and adding water will affect the jumping state of the magnetic fluid. Troubleshooting Q: If I have two VENOM BALL speakers, how do I pair them TWS to create body sound? A: 1. Turn on two VENOM BALL speakers at the same time, but do not immediately connect to Bluetooth. 2. Long touch the "icon" on either speaker to start TWS pairing. When pairing, both speakers will emit sound, indicating successful TWS connection. 3. Turn on Bluetooth on your phone or computer, connect to VenomBall, and you can play stereo sound. Q: After playing for a while, the audio stopped. What is the reason? How to solve it? A: 1. Low battery level: Please try to fully charge the speaker. 2. Overheating: The magnetic fluid in the glass bottle may be overheated, and it will automatically resume jumping after cooling down. 3. Power saving mode: If there is no music playing for more than 20 minutes, enter standby mode and press the switch on the back to restart. Q: If there are bubbles in a glass container, how can I make them disappear? A: Keep the speaker at a 45 degree angle and play 3-5 songs. Bubbles will rise to the top of the container and disappear. magnetic fluid bluetooth speaker