Mad Chemist Atomic Armor 75

Mad Chemist Atomic Armor 75 is a high-performance, thin-film Self-Healing Ceramic Overcoat designed specifically for automotive painted and bare metal surfaces. Unlike standard brittle ceramics, this hybrid uses a PDMS-Polyurea Silazane base and graphene infusion to provide extreme hardness without sacrificing the flexibility needed for protecting vehicle body panels. Apply like a scientist, drive like a madman. Keep it under 0.75 mils for a flawless, atomic-bonded finish that defies the elements.   · The "Atomic" Promise: This isn't a layer that sits on top of your paint; it's a covalent fusion. The silazane molecules create a permanent chemical "handshake" with the substrate, making it impossible to wash or peel off. · The "Armor" Advantage: Built on a PDMS-Polyurea backbone, this shield is tough enough to stop scratches but flexible enough to move with your car's metal panels. It won't crack like old-school, brittle ceramics. · The "75" Precision: Engineered for a maximum 0.75 mil (19-micron) thickness. This "sweet spot" ensures total optical clarity and prevents the "mud-cracking" common in inferior, thick-build coatings. · The "Slick" Factor: Infused with a secret alchemist's blend of additives, creating a surface so hydrophobic and slippery that friction—and the swirl marks it causes—is virtually eliminated. Explore the science of surface protection  → Physical & Application Properties   Base PDMS-Polyurea Silazane Hybrid 100% Synthetic Inorganic/Organic Blend High-solids for superior build   Target DFT 0.5 – 0.75 mils (12–19µm) Do not exceed 1.0 mil to avoid mud-cracking   Appearance Optically Clear, High Gloss Restores depth and "wet look" to paint   Cure Time (Tack-Free) 15 – 30 minutes Fast return-to-service Full Chemical Cure 24 – 48 Hours Varies by humidity/temperature             2. Performance & ASTM Testing Data Pencil Hardness (ASTM D3363): 9H. Provides maximum resistance to gouging and surface marring Adhesion (ASTM D4541): >500 PSI (Pull-off). Covalent bonding ensures the coating does not delaminate from the paint matrix Corrosion Resistance (ASTM B117): 2,000+ Hours. The tortuous path created by the formulation prevents salt and moisture from reaching the substrate Flexibility (ASTM D522): 1/8" Mandrel Bend (Pass). The PDMS segments allow the film to bend without cracking, a feat standard SiO2 ceramics cannot match Hydrophobicity (Water Contact Angle): 115°+. The silicone wax additives ensure permanent beading and self-cleaning   3. Application Instructions Preparation: Surface must be fully decontaminated with no waxes or other coatings on the substrate. Environmental: Apply in a dust-free environment between 60°F and 85°F. Method: Use an HVLP spray gun (1.0mm tip) or a high-quality microfiber applicator. Thickness Control: Aim for a 1.0 mil Wet Film Thickness (WFT) to achieve the desired 0.75 mil DFT. Warning: Do not apply in direct sunlight. If applied too thickly (>1.0 mil), the coating may exhibit mud-cracking or uneven curing.   To ensure Atomic Armor 75 reaches its maximum 9H potential while maintaining the flexibility of the polymer matrix, the curing protocol must be strictly followed. Since this is a moisture-cure system assisted by heat, the "Mad Chemist" approach offers two paths: Protocol A: The Natural Lab Cure (Ambient) Best for: DIY enthusiasts or shops without specialized IR equipment. · Initial Flash (15–30 mins): The solvents evaporate, and the polymers begin reacting with humidity in the air. · The surface will be "tack-free" but vulnerable. The "No-Touch" Zone (4–6 hours): Do not expose to water or dust. · The polyurea segments are cross-linking, building the "elastic" foundation. Functional Hardness (24 hours): Reaches ~5H. The car can be driven but avoid washing or harsh chemicals. · Full Atomic Bond (7 days): The coating achieves its final 9H hardness and maximum chemical resistance as the moisture-cure reaction completes at the molecular level.   Protocol B: Mad Chemist's Rapid Cure (Heat/IR Assisted) Best for: Professional detailing studios looking for immediate 9H results. Flash Off (10 mins): Allow the coating to level and solvents to "gas out" naturally at room temperature. IR Lamp Placement: Position Short-Wave Infrared (SWIR) lamps 18–24 inches from the panels. Thermal Cycle: Bake at 140°F (60°C) for 15–20 minutes per panel. Warning: Do not exceed 160°F, as the silicone wax component could bloom too quickly, causing a hazy finish. Cool Down: Allow the panels to return to room temp naturally. Result: The heat "forces" the polymers to cross-link instantly. The coating achieves near-9H hardness and full water repellency within 2 hours, allowing for same-day delivery even in rainy weather. Is it ready to go into the wild? Drop a microfiber towel on a flat hood. If it doesn't slide off instantly, the Atomic Armor 75 hasn't finished its molecular handshake yet. Give it more time.