Baby Muffs™

BABY MUFFS   Directions Place the headband over the muffs Position one clip over each muff, leaving the headband in between Attach clips to muffs (press one side of each clip until it clicks) Clips have a two-step clicking mechanism – One click attaches the clip to the muff allowing the headband to move – Second click fixes the clip stronger to the muff and fixates muff to headband – One click should be used at this stage (to allow for proper positioning on baby) Place headband and muffs onto the head (adjusting muff position and hook and loop fastener as needed) – Make sure muffs seal the ear completely – Headband should keep muffs in place and feel comfortable (snug, but not too tight) – Headband should not block the eyes Fixate the muffs onto the headband (with second click) once proper muff position is achieved If there is not a noticeable difference in noise level, earmuffs are probably not fitted properly. To obtain proper fit, repeat fitting instructions.   Warnings & Precautions Noise reduction is adversely affected by anything that impairs the seal of the earmuff cushions. Improper fitting will reduce effectiveness and could result in hearing loss or injury.   Care and Cleaning Instructions Clean earmuffs with a damp cloth using lukewarm water and mild soap. Use only mild soaps known not to be harmful to the wearer. The headband is machine washable. Gentle cycle recommended. This product may be adversely affected by certain chemical substances. Refer to manufacturer for further information.