Mark-10 Model 3i Digital Force & Torque Indicator (M3i)

The 3i digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & Test™ technology, all calibration and configuration data is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with other Mark-10 indicators. The 3i shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes. The 3i includes MESUR™Lite data acquisition software, for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation. Features Interchangeable force and torque sensors through Plug & Test™ technology (sensors are sold separately) High-speed 2,000 Hz sampling rate Ultra-compact size Large backlit graphic display Programmable set points with pass/fail indicators Live load bar graph with set point markers Peak readings and set points always displayed Configurable audio alarms and key tones Programmable auto-shutoff Configurable audio alarms and key tones Battery or AC operation MESUR™ Lite data collection software included CE mark 3 year warranty Display Indicators Specifications Accuracy: +/-0.2% of full scale + sensor Sampling Rate: 7,000 Hz Power:  AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low. Battery life Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use Measurement Units: lbFin, ozF, gF, kgF, N, kN, mN Output: USB, RS-232, Mitutoyo, and analog USB / RS-232: Configurable up to 115,200 baud. Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC, ±0.25% of full scale at capacity. General purpose: Three open drain outputs, one input. Set points: Three open drain lines. Safe Overload: 150% of full scale (display shows “OVER” at 110% and above) Weight: 0.7 lbs [0.3 kg] Included Items   M5i Digital Indicator Carrying Case USB Cable AC adapter Battery Resource CD Force and torque sensors are available separately. Digital Indicators and Sensors Available Models 7i, 5i, and 3i force / torque indicators are designed for use with Mark-10’s Plug & TestTM remote force and torque sensors. All calibration and configuration data is saved within the sensors’ smart connectors - not the indicator - allowing for true interchangeability. Each sensor series is available in a range of capacities, from 0.25 to 10,000 lbF (1 N to 50 kN) full scale and from 10 ozFin to 5,000 lbFin (7 Ncm to 550 Nm) full scale. Refer to individual sensor data sheets for further details.   Documents Model 3i Data Sheet Model 3i Manual Mark-10 Digital Indicator Comparison   Dimensions in[mm]