Perma-Chink M-Balm Liquid Wood Epoxy

Perma-Chink M-Balm Epoxy Wood Consolidator: Wood that has lost its integrity due to decay or insects can be hardened and consolidated with M-Balm. This two-component liquid epoxy penetrates into soft, porous or spongy wood to form a strong water-resistant mass. M-Balm should always be used in preparation for filling pockets of decayed wood with E-Wood epoxy putty. Perma-Chink M-Balm Epoxy Features & Benefits: • Penetrates deeply into deteriorated and rotted wood, creating a strong, solid base for restoration. • Two component liquid epoxy. • Low viscosity for penetration into soft, spongy and porous wood. • Forms a hard, water resistant mass. • Excellent for both interior and exterior use. Application Methods: • Squeeze bottle • Syringe • Small brush Perma-Chink M-Balm Resources: SDS Sheet - M-Balm Part A SDS Sheet - M-Balm Part B M-Balm Technical Data Sheet Perma-Chink M-Balm Epoxy Application Instructions & Technique: • Application temperature is between 40° F to 90° F. • Mix two parts of M-Balm Epoxy (Part A) with one part of M-Balm Hardener (Part B) by volume. • Mix no more that can be applied within 30 minutes. • For easy measurement, use mixing/applicator squeeze bottle. • Apply to affected area with mixing/applicator squeeze bottle, syringe, brush or roller. • Apply only to dry wood. The wood must be very dry (15% moisture content or less). • Repeat if necessary. • In extreme cases of deep rot, drill a series of holes into the decayed area and pour liberally into the affected area. • Allow time for M-Balm to soak well into the area. • Repeat if necessary. • M-Balm coverage rate depends on porosity of wood. Perma-Chink M-Balm Epoxy Package Contents: 24 Oz. Box: • (1) 16 Oz. Bottle Epoxy (Part A) • (1) 8 Oz. Bottle Hardener (Part B) • (1) 8 Oz. Mixing/Applicator Squeeze Bottle 1.5 Gallon Kit: • (1) 1 Gallon Jug Epoxy (Part A) • (1) ½ Gallon Jug Hardener (Part B) Perma-Chink M-Balm Epoxy Drying Time & Cleanup: • Uncured mixed M-Balm (Part A and Part B) may be cleaned up with white vinegar then flushed with water. • M-Balm Epoxy dries between 12 to 24 hours. • Do not allow to dry on wall. • M-Balm cures slower in low temperatures. (Never change mixing rates to compensate for temperature.) Perma-Chink M-Balm Epoxy Shelf Life: • M-Balm has a shelf life of 1 year. • Do not freeze! Perma-Chink M-Balm Epoxy Safety Precautions: • Always wear protective disposable gloves when using this product. • Avoid skin contact. Skin sensitization may result from prolonged and repeated contact. • If use causes soreness, redness, blistering, or other symptoms of irritation, stop use and see a physician immediately. Use with adequate ventilation. • If eye contact occurs, flush with large quantities of water and contact a physician immediately. Do not use around open flame. • If Part A is swallowed, induce vomiting. • If Part B is swallowed, do not induce vomiting.