LUXMAN M-10X Power Amplifier-silver

The LUXMAN M-10X Power Amplifier. The best, from the best.  Stereo 150 Watts per channel @ 8-ohms | 300 Watts per channel @ 4-ohms |1200 Watts peak Bridged Mono 600 Watts @ 8-ohms  | 2,400 Watts peak Pure Class A operation on early output for warm, detailed sound at low levels.  LIFES 1.0 (Luxman Integrated Feedback Engine System) feedback engine for richer, more natural sound.  4x2 Output configuration that combines two three-stage Darlington circuits and quadruple paralleled push-pull amplifier circuits The oversized power supply’s EI-type highly regulated power transformer has a large capacity of 1,250VA (instantaneous maximum 2,500VA), obtaining tremendous regulation performance that does not waver with any load fluctuations. Both balanced (XLR) and unbalanced (RCA) inputs.  Illuminated needle VU meters on the front panel give real-time feedback.  Heavy, solid build with anti-vibration footing. Balanced design keeps each channel separate for cleaner stereo imaging. High damping capability — tight control over speakers for crisp dynamics.  Trigger I/O for automation integration. LUXMAN M-10X Specifications: Rated Continuous Power Output Per Channel: 150 Watts @ 8Ω) Stereo | 300 Watts @ 4Ω Stereo | 600 Watts @ 8Ω Monaural Maximum Power Output Per Channel: 1,200 Watts @ 1Ω Stereo | 2,400 Watts @ 2Ω Monaural Input Sensitivity:  1.24V/150W (8Ω) | GAIN 29.0dB Input Impedance:  Unbalanced 51kΩ | Balanced 28kΩ Frequency Response: 20Hz to 20kHz (+0, -0.1dB) | 1Hz to 130kHz (+0, -3.0dB) Total Harmonic Distortion (THD): 0.003% or less (1kHz/8Ω) | 0.04% or less (20Hz to 20kHz/8Ω) Signal-to-Noise Ratio (IHF-A): 117dB Amplification Feedback Circuit: LIFES 1.0 Output Configuration: 3 stage Darlington 4 paralleled push-pull Damping Factor: 600 Power Consumption: 540W | 290W (under no signal) | 1.0W (at standby) External Dimensions: 17.3” (W) x 8.8” (H) x 19.2” (D)  Net Weight: 106.7 lbs. Include Accessories: Trigger Cable (Modular/3.5mm Monaural), Power cable