Low-Profile Prerunner Series SCX10 III Base Camp Front Bumper

Scale looks abound in our latest release for the new Axial Adventure SCX10 III Base Camp Truck! This Low-Profile Prerunner bumper was designed to fit slightly larger-than-stock tire applications. The width is even with the edges of the body.  Full-width Steel, welded Prerunner Series Front Bumper for the SCX10 III Base Camp Specifications: - Made from 3/16" rod. - Approx. 170mm wide.  - Mounts using included hardware. Spacer/additional washers may be necessary. - Steel construction - Hand Made/Welded. - Does not fit a winch. - Requires removal of stock bumper mount/plate. Bumper fits into the ends of the C-Channel.  **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: not as susceptible to chips Mounting Instructions: 1. Bumper is made to slide inside the c-channel of the frame rails.  2. Use washers (included) or spacer (not included) between steering link and frame rails. Use longer screws (included). Back screws with a washer and nut. Does not require use of SCX10 III body-post mounting system.