Lotioncrafter® PE 9010

11/6/2024: Pricing increases and reduced availability of Euxyl PE 9010 has lead us to source comparable material from an alternative manufacturer. The composition and INCI for this material is the same as Euxyl PE 9010. Please review the Tech Data & SDS tab for more information prior to purchasing.  CAS No. 122-99-6, 70445-33-9 Lotioncrafter PE 9010 is a liquid cosmetic preservative based on phenoxyethanol and ethylhexylglycerin.  The addition of ethylhexylglycerin affects the interfacial tension at the cell membrane of microorganisms, improving the preservative activity of phenoxyethanol.  Lotioncrafter PE 9010 is considered to be a broad spectrum preservative effective against both Gram-positive and Gram-negative bacteria, yeast and mold.  Lotioncrafter PE 9010 is paraben free and formaldehyde free. For Lotioncrafter PE 9010 to perform effectively in destroying organisms in products already contaminated, a minimum contact time of 48 hours is necessary. Since the effect of Lotioncrafter PE 9010 takes place through chemical reactions with the microorganisms, when it is used in heavily contaminated products, loss of its active ingredient (phenoxyethanol) must be taken into account. Lotioncrafter PE 9010 can be used in formulas containing natural raw materials (which have a greater risk for microbial contamination). Microorganisms introduced by this pathway are quickly eliminated by Lotioncrafter PE 9010. Good production hygiene as well as the use of raw materials with low microorganism levels, as a result of correct raw material control, are vital prerequisites for the production of finished products. Applications Lotioncrafter PE 9010 is recommended for use in: Creams, lotions, and serums Formulations containing natural raw materials Wet wipes Shampoo**, conditioners and other hair care products Body washes** Anhydrous skin care products ** High loads of ethoxylated surfactants can result in a loss of efficacy. Lotioncrafter PE 9010:  Phenoxyethanol        90.0% Ethylhexylglycerin     10.0% While Euxyl® PE 9010 is classified as a "mild" preservative as formulated, the raw material should be handled with care as the full strength preservative causes severe eye irritation and may be dangerous if swallowed.  Read the SDS before use and follow recommended guidelines for handling, including Safety Goggles! INCI: Phenoxyethanol (and) Ethylhexylglycerin California Prop 65 Statement: The following statement is made in order to comply with the California Safe Drinking Water and Toxic Enforcement Act of 1986. This product is not known to the State of California to cause cancer, birth defects or other reproductive harm. SDS & Tech Data Lotioncrafter PE 9010 Specification Sheet Lotioncrafter PE 9010 SDS Formulation Guide Lotioncrafter PE 9010 is fully effective both in anionic as well as cationic and non-ionic systems, but a high load of ethoxylated surfactants can result in a loss of efficacy. Lotioncrafter PE 9010 shows good compatibility with salts. Lotioncrafter PE 9010 is stable to hydrolysis and effective in formulations of pH 3-12. Lotioncrafter PE 9010 has limited solubility in water (1% at 20°C), but is readily soluble in polar solvents such as propylene glycol and propanediol 1,3.  It is moderately soluble in glycerol and sorbitol. Lotioncrafter PE 9010 exhibits no interaction with sulphite ions Shows good compatibility with a wide range of cosmetic ingredients.  No discolorations have been detected. Shows no interaction with pigments such as TiO2. Recommended use levels: 0.5 - 1.0%, maximum use level 1.1% Appearance: Clear, colorless liquid Solubility: Soluble in water and oil Try these formulations using this ingredient: Basic Body Contouring Lotion Basic Lotion with Simulgel EG Gentle Cleanse Daily Shampoo Goat Milk Lotion Hydrating Resveratrol & Niacinamide Facial Moisturizer Palm-free, Natural Body Cream Shealoe™ Cream Collagen Face Lotion Shealoe™ Cream (PEG-free Version) (Link to video)