LM UTV Tie Rod Clevis Bolt Kit Low Profile

This is the LM UTV low profile clevis bolt kit for tie rods with clevis ends. It is made from aircraft grade 17-4 stainless steel and heat treated, machined to the correct shoulder and thread length, and includes 2 bolts, and nuts. It is not tied to one machine — it fits tie rods with clevis ends, so it is a universal hardware kit. Laser etched logo, made in the USA. Steering hardware is the last place you want a stretched or galled bolt, and the low profile head keeps it from sitting proud where clearance is tight. Key Features Low profile high strength steering tie rod clevis bolt kit Made from aircraft grade 17-4 stainless steel and heat treated Correct shoulder and thread length Includes 2 bolts, and nuts Fits tie rods with clevis ends Laser etched logo Made in the USA Built To Solve: Stretched And Galled Clevis Hardware In UTV Tie Rod Ends A bolt that has stretched under repeated hard landings. A stretched bolt lets the joint move even when the nut is still tight. Galled threads that fight you on the next teardown. Reused steering hardware is what seizes when you are putting the car back together. Head clearance at the clevis. The low profile head is why this kit exists rather than generic hardware. Guessing at shoulder length. The bolt is cut to the correct shoulder and thread length instead of clamping on the threads. Best For: Anyone Rebuilding Or Installing LM UTV Tie Rods With Clevis Ends Owners installing tie rods who want fresh hardware in the clevis Riders replacing steering bolts during an off-season rebuild Anyone who pulled a stretched or galled bolt out of a clevis end Racers who retire steering hardware on a schedule rather than on failure If you need radius rod, toe rod, hub or trailing arm bolts, this is the wrong kit — see the bolt kits collection Specifications Kit contents: 2 bolts, and nuts Material: aircraft grade 17-4 stainless steel Treatment: heat treated Length: correct shoulder and thread length Profile: low profile head Marking: laser etched logo Origin: Made in the USA Manufacturer Part Number: BLT-00-01 Fitment This is a universal kit. It fits LM UTV tie rods with clevis ends rather than a specific make, model or chassis, and LM UTV publishes no model year range for it. Check that your tie rod uses a clevis end before ordering. Fitment is not guaranteed on applications not listed here. FAQ What machine does this bolt kit fit? It is not sold by machine. It fits LM UTV tie rods with clevis ends, so it is universal steering hardware. How many bolts are in the kit? It includes 2 bolts, and nuts. What are the bolts made from? Aircraft grade 17-4 stainless steel, heat treated. Why does it say low profile? The head is low profile, so it does not stand proud at the clevis where clearance is tight. Will the bolt bottom out or clamp on the threads? No. LM UTV specifies the correct shoulder and thread length, so the shoulder carries the clevis rather than the threads. Where is it made? Made in the USA, with a laser etched logo on the hardware. Why LM UTV LM UTV makes this hardware in the USA from aircraft grade 17-4 stainless steel and heat treats it, and specifies shoulder and thread length to the joint rather than selling generic bolts by diameter. Order The Low Profile Tie Rod Clevis Bolt Kit Confirm your tie rods use clevis ends, then add the kit to your rebuild. Fresh heat treated stainless in the steering joint is cheap insurance next to pulling a stretched bolt out later.