Liquitex Satin Varnish

What it does 100% acrylic polymer varnish adds a satin sheen, protects and resists dirt retention Dries clear to a flexible, non-tacky, hard surface Increases brightness and color saturation Adjusts and unifies surface sheen Improves surface durability - ideal when shipping or exhibiting Protects colors from UV light damage Resists discoloration - yellowing and fogging - caused by humidity, heat and UV Depending on the substrate it allows surface moisture to pass through and breathe Allows for easy cleaning without fear of damaging the acrylic paint film Has excellent levelling properties - will not hold brush marks Semi-opaque when wet, transparent when dry Use on flexible or rigid supports Designed for interior and exterior use How to use it As this is permanent, do a patch test first Before varnishing ensure paint surface is fully dry (72 hours-two weeks depending on thickness) Ensure your space is well ventilated and dirt and dust-free Place the artwork flat on a surface - always varnish horizontally Stir gently before use Use long, even strokes, covering the surface top to bottom while moving from one side to the other - dont go over bits you have missed, but leave to dry and then re-varnish area While applying, look for surface bubbles and even them out immediately Apply 1-2 thin coats, allowing at least three hours dry time between coats If you require more than two layers, first use Gloss Varnish as a base layer and build to your desired thickness, then apply Satin Varnish as your top coat How not to use it Do not shake or vigorously over-brush as this can result in surface bubbles and a foggy, hazy look when dry Dont apply with a roller or sponge brush Do not thin with water Dont apply in one thick coat, but several thin coats, to avoid brush marks, drips and cloudiness Dont go back over areas you have already done, as this can cause clouding Dont attempt to remove once applied Do not use with any non-acrylic media