Linear Multicode 302210: Safety Edge Transmitter 300MHz

The Linear 302210 is a wireless gate safety edge transmitter on 300 MHz in the Multi-Code format. It mounts on the gate, door or barrier arm and wires to a standard exterior safety edge sensor. When the edge is hit, it sends an entrapment signal to the receiver so the operator can stop or reverse. It runs on a 9-volt battery and has 1,024 codes set on DIP switches. It replaces coil cords and cable runs to the moving gate. The housing is a weather-resistant fiberglass box with a moisture-coated circuit board. It mounts with sealed interior screws, and four mounting screws are included. Linear recommends a Miller gate edge sensor. Size is 4.28 in W x 2.875 in H x 2.25 in D. What's Included 302210 safety edge transmitter Four mounting screws Before You Order Works with 300 MHz Multi-Code receivers, including the Linear 109950 and 302850 with the jumper set to 300 MHz. Needs a separate safety edge sensor wired to the transmitter, sold separately. Connect the receiver output to the operator's safety edge or obstacle input. Check the operator manual for edge input type and monitoring requirements. The 105104 is the 310 MHz Stanley-version model of this transmitter.