Linear Multicode 1099-50: Safety Edge Receiver

This listing is the Linear 109950 1-channel Multi-Code receiver, used as the receiving end for the Linear 302210 (300 MHz) and 105104 (310 MHz) wireless safety edge transmitters. An internal jumper sets 300 or 310 MHz. It has 1,024 codes set on a 10-position DIP switch and runs on 12-24 V AC or DC. When the edge transmitter sends an entrapment signal, the receiver's normally open relay (up to 1 A at 30 VAC) closes on a 3 ft 2-conductor lead with spade lugs. An 11 in whip antenna on a Type-F connector, a bulkhead connector and 3 ft of coax are included. Size is 3.625 in W x 5.25 in H x 1.5 in D. What's Included 109950 receiver 11 in whip antenna 3 ft coax and bulkhead connector Before You Order Pair with the Linear 302210 (300 MHz) or 105104 (310 MHz) safety edge transmitter and set the jumper to match. Wire the relay output to the operator's safety edge or obstacle input. Check the operator manual for edge input type and monitoring requirements. Set the receiver DIP switches to match the edge transmitter code. Related Linear Multi-Code receivers: 109950 (1-channel, 12-24 V, 300/310 MHz), 302850 (2-channel, 12-24 V, 300/310 MHz), 109920 (1-channel, 115 VAC plug-in transformer, 300 MHz), 109020 (1-channel garage receiver, 300 MHz), 309013 (1-channel garage receiver, 310 MHz).