
$399.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The LiftMaster HTR is a thermostat-controlled heater kit for supported pad-mounted gate operators. It helps maintain the gearbox and batteries at a suitable temperature in cold conditions, using the mounting arrangement specified for the operator. Although the supported operators include DC models, the heater instructions specify a 110–250V AC supply. Do not connect it to a 12V or 24V battery terminal. Confirm the exact operator, heater revision, mounting bracket and available AC supply before ordering. Compatibility — Models, Versions and Exclusions Model or selection point Compatibility requirement HDSW24UL and HDSL24UL Installation instructions show model-specific mounting and heater wiring. IHSL24UL and INSL24UL Instructions show an additional bracket arrangement; confirm the required supplied parts. CSW24 / RSW12 and CSL24 / RSL12 series Separate mounting sections appear in the heater instructions; match the actual operator revision. Battery-only or solar-only power Does not supply the heater’s specified AC input; any separate supply requires an approved installation. Separate the Operator Motor Voltage from Heater PowerThe DC designation of a gate operator describes its operating platform; it does not mean every accessory connects to the battery circuit. Have the installer identify the correct heater supply and the applicable connection point in the current manual. A product description that calls this a 24V heater should not override the electrical label or manufacturer installation instructions. The heater is one part of cold-weather preparation. The gate must remain mechanically sound, batteries must be serviceable and the enclosure must be installed as intended. A heater does not remove snow from the travel path or compensate for frozen hinges, a damaged gearbox or weak batteries. Have the technician diagnose cold-weather trouble before assuming that heat alone will correct it. Specifications and Product Identification Specification Details Model HTR Purpose Cold-weather heating inside supported gate operators Heater supply 110–250V AC, per installation instructions Specified thermostat setting 45°F to 60°F Cold-weather application reference Instructions discuss outside temperatures below -4°F Service precaution Disconnect power and allow 15 minutes of cooling before service Before Ordering Record the complete operator model and verify its HTR accessory instructions. Confirm the heater’s actual electrical label and an appropriate AC supply. Check the mounting bracket and required clearances for that operator. Have the batteries, mechanical drive and gate movement evaluated if winter faults are already occurring. Package Contents and Separate RequirementsThis SKU identifies the heater kit. The installation instructions describe a heating element, thermostat and mounting hardware, with the arrangement varying by operator. Confirm the current carton and any additional model-specific bracket before ordering. Batteries, an operator and any new site electrical circuit are separate requirements; do not assume the kit converts an off-grid installation into an AC-powered one. Safety Warnings — Read Before Installation or Service WARNING: The heater uses hazardous AC voltage and becomes extremely hot. Installation and service require a qualified technician. Disconnect all applicable electrical and battery power before installation or service. Keep wiring clear of hot surfaces and follow the specified clearances. Do not touch the operating heater. Allow 15 minutes for cooling before servicing the operator, as directed by the manufacturer. Use the specified thermostat setting and wiring arrangement. Restore the enclosure and test gate operation and protection devices after service. Related Products and Important Differences LMRRUL monitored photo eye — a separate gate safety component for approved operators; heating the operator does not maintain or replace the sensor. LMWEKITU monitored wireless edge kit — a separate monitored edge system whose compatibility and condition should be checked independently. Frequently Asked QuestionsIs HTR a 24V DC heater?The referenced HTR instructions specify 110–250V AC. A supported operator’s DC motor voltage is not the heater supply voltage. Can it run directly from solar gate batteries?The stated AC input is not supplied by a battery connection. Have an installer confirm whether an approved separate supply is available. Will it melt ice along the entire gate path?No. It heats components within the supported operator enclosure. The gate path and external moving parts still require appropriate maintenance. Can I service the operator immediately after switching it off?The heater can remain hot. Follow the manufacturer’s 15-minute cooling instruction as well as the required power-isolation procedure. Need Help Confirming the Right Product?Contact Garage-DoorParts.com before ordering. Send the full equipment model, readable part labels and photographs of the installed assembly. Include the dimensions, electrical configuration or accessory details relevant to your project so the listing can be checked against the actual installation.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$399.00