Liftmaster CSW200101UL Swing Gate Operator 1 HP

Gear-Driven Commercial AC Swing Gate Operator w/ myQ for Class I-IV The LiftMaster CSW200101UL is a 1 HP AC continuous-duty swing gate operator built for high-traffic commercial and residential vehicular gate applications across UL 325 Class I through IV. It handles swing gates up to 2,000 lbs and 22 ft. The 900:1 dual oil-bath wormgear reduction drives the gate through a 90° arc in approximately 20 seconds and delivers the torque margin needed for continuous operation in high-cycle commercial environments. The 1/4 in gold zinc-plated steel chassis resists corrosion, and the UV-resistant cover protects internal components in outdoor installations. The CSW200101UL includes the Security+ 2.0 on-board radio receiver operating on tri-band 310/315/390 MHz, compatible with up to 50 remote controls (unlimited with model 811LM or 813LM). myQ technology enables remote monitoring and gate control from anywhere via cellular or Wi-Fi connection. Wireless dual-gate communication synchronizes bi-parting gate operation without driveway trenching. The pre-motion warning alarm activates 3 seconds before gate travel, and the inherent reversing sensor detects obstructions and reverses or stops the gate accordingly. Quick close and anti-tailgate functions are controlled through the expansion board. Surge suppression provides lightning protection against strikes up to 50 ft away. The manual release handle allows gate operation during power loss while maintaining limit position upon re-engagement. Key Features 1 HP AC continuous-duty motor; 900:1 dual oil-bath wormgear reduction; 1/4 in gold zinc-plated steel chassis Gate capacity up to 2,000 lbs and 22 ft; UL 325 Class I, II, III, and IV. UL listed myQ compatible; Security+ 2.0 tri-band (310/315/390 MHz) on-board radio receiver; up to 50 remote controls (unlimited with 811LM/813LM) Wireless dual-gate communication; synchronized close; no driveway trenching required Pre-motion warning alarm (3 sec before gate travel); inherent reversing sensor; quick close and anti-tailgate 3 monitored safety inputs on main board, 3 on expansion board; programmable auxiliary relays Surge suppression rated for lightning strikes up to 50 ft away Emergency disconnect with manual release handle; maintains limit position on re-engagement LED diagnostic display; mechanical limit system maintains gate position after manual disconnect use Includes LMRRUL monitored retro-reflective photoeye (50 ft max range), arm assembly, 2 warning signs, and 2 keys 5-year commercial warranty; 7-year residential warranty Technical Specifications Model: CSW200101UL Motor: 1 HP AC, continuous duty, high-temperature rated Gearbox: 900:1 wormgear reduction, 2 commercial oil-bath gearboxes Maximum Gate Weight: 2,000 lbs Maximum Gate Length: 22 ft 90° Travel Time: 20 seconds UL Classification: Class I, II, III, IV Input Power: 120VAC, 12A (18A including accessory outlets) Accessory Power Output: 24VDC, 500mA Radio Receiver: Security+ 2.0, tri-band 310/315/390 MHz; up to 50 remotes Safety Inputs: 3 main board, 3 expansion board (6 total) Operating Temperature: -4°F to 140°F (-20°C to 60°C) without heater; -40°F to 140°F (-40°C to 60°C) with optional heater (HTRNB) Chassis: 1/4 in gold zinc-plated steel Operator Weight: 175 lbs Dimensions (with cover): 28 in H x 25.3 in W x 15.3 in D Included: LMRRUL monitored retro-reflective photoeye, arm assembly, 2 warning signs, 2 keys, documentation and hardware Optional: Heater kit (HTRNB), plug-in loop detector (LOOPDETLM), monitored wireless edge kit (LMWEKITU), 3-phase transformer kit (3PHCONV), KPW250 wireless commercial keypad Warranty: 5 years commercial; 7 years residential Manufacturer: LiftMaster / The Chamberlain Group Condition: New Conclusion The included LMRRUL retro-reflective photoeye satisfies the monitored entrapment protection device required per UL 325 for swing gate installations. The CSW200101UL is the 1 HP model in the CSW200UL family and the appropriate choice for gates exceeding the 1,600 lb and 18 ft capacity of the CSW200501UL. Note that gate capacity varies by gate length: the 2,000 lb rating applies at 12 ft, stepping down to 1,600 lbs at 16 ft, 1,400 lbs at 18 ft, and 1,000 lbs at 22 ft per the manufacturer capacity chart. Confirm your gate weight and length against that chart before ordering. For installations requiring extended temperature performance below -4°F, the optional heater kit (HTRNB) is available separately and extends the operating range to -40°F. Download Specs Download Manual