Classic Single-Cutaway Electric Guitar Kit, Mahogany Body, Rosewood Fretboard, Abalone Pearloid Inlays, Left-Handed

Build your own left-handed DIY guitar with TE style unfinished Guitar Kit, Mahogany Body, Rosewood Fretboard, and Chrome Hardware. Full Specifications General Dexterity: Left-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (4/10) Straightforward wiring with few connections to solder, but the tremolo bridge requires careful setup for tuning stability Mahogany has open grain that needs filling before finishing for a smooth result Flat body is straightforward to sand and finish evenly Body Material: Mahogany (2-3 pcs) Type: Solid Cutaway: Single Binding: None Top Veneer: None Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 25.5" / 648 mm Binding: None Fretboard Material: Rosewood Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Single Coil Bridge Pickup: TE-Style Controls: 1 Volume, 1 Tone, 3-Way Selector Wiring: DIY (soldering required) Wiring Diagram: 2x Single Coil, 1 Volume, 1 Tone, 3-Way Selector Output Jack: Side jack Hardware Bridge: T-Style Non-Tremolo Tuners: Closed Pickguard: White Knobs: Chrome Cavity Covers: None Strings: Steel Finish: Chrome What's in the Box Mahogany guitar body (unfinished) White pickguard fitted to the body with a chrome-covered single-coil neck pickup Mahogany neck with rosewood fretboard and abalone block inlays 6x chrome tuners with bushings and washers 6x small chrome cone-shaped ferrules Chrome control plate with two chrome knurled knobs, a lever switch and output jack fitted Black bridge plate with a black single-coil bridge pickup and three chrome barrel saddles Black neck plate with mounting screws 2x chrome strap buttons with black felt washers and screws Set of guitar strings Allen wrench Black instrument cable Assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.