Lefty F2 Guitar Kit with Mahogany Body & Neck

Build your own left-handed DIY guitar with a mahogany body and neck, rosewood  fretboard, and trapezoid abalone inlays. Full Specifications General Dexterity: Left-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (5/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Straightforward wiring with few connections to solder Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany (2pcs, center-joint) Type: Solid Cutaway: Double Binding: None Top Veneer: None Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75″ Binding: None Fretboard Material: Rosewood (Product images show ebony) Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Trapezoid Inlay Material: Abalone (Engineered) Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 2 Volume, 2 Tone, 3-Way Toggle Switch Output Jack: Top jack Hardware Bridge: Tune-O-Matic w/ stop bar Tuners: Sealed, Diecast Pickguard: White Knobs: Chrome Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Mahogany guitar body (unfinished) Mahogany neck with dark fretboard and large abalone block inlays 6x chrome tuners with bushings and washers 2x humbucker pickups with chrome covers and black surrounds Wiring harness with four potentiometers 3-way toggle switch with black tip, nut and washers Output jack with nut and washers 4x black knobs with silver reflector caps Chrome stopbar tailpiece with mounting studs and anchors Tune-o-matic style bridge with six adjustable saddles White pickguard Black truss rod cover with screw Black rear cavity cover Set of guitar strings Allen wrench Black instrument cable Assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.