Dual-Head LED Emergency Light with Adjustable Optics

Dual-Head LED Emergency Light - 1 W Heads, 90 min, 120/277V - Features & Specs The LEDR-2 dual-head LED emergency light is a compact, code-ready UL 924 LED emergency fixture for damp-location interiors and is part of our thermoplastic emergency lights lineup. Two 1 W adjustable heads provide reliable egress lighting with typical 14 ft center-to-center spacing on a 3 ft path at 7.5 ft mounting height. A 3.6 V Ni-Cd battery delivers 90-minute runtime, and universal 120/277 VAC input simplifies installs. For exterior or hose-down areas, see wet-location emergency lights. Browse all LED emergency lights. UL 924 Ni-Cd / 90 min Adjustable Optics Damp Location 120/277V Key Features UL 924 listed LED emergency unit; damp-location rated (0–50 °C) Dual, fully adjustable 1.0 W LED heads; typical spacing 14 ft C-to-C at 7.5 ft (3 ft path) Universal input 120/277 VAC with status LED & push-to-test 3.6 V Ni-Cd battery with 90-minute emergency runtime Solid-state transfer; two-rate charger (~24 h full recharge) Snap-fit backplate fits 4" J-box; wall/ceiling surface mount; top/side ½" conduit knockouts Injection-molded, flame-retardant UL 94 5VA thermoplastic housing (white or black) Optional SPV 208/220/240 VAC input (50/60 Hz) Compliance: NFPA 101, NEC, OSHA Warranty: 5-year electronics/housing; battery 5-year prorated Related Remote-Head Guides Remote Heads—Sizing Calculator & Wiring Best Practices MR16 vs PAR36—Choose Beam Angles & Optics Spec Sheet Download LEDR-2 Emergency Unit Spec Sheet (PDF) Illumination Two 1 W LED heads (8 × 0.125 W each) with adjustable chrome-plated reflectors Typical spacing: up to 14 ft center-to-center on a 3 ft egress path at 7.5 ft mounting height Electrical 120/277 VAC universal input with status LED and push-to-test 3.6 V Ni-Cd battery; 90-minute emergency operation Solid-state transfer; two-rate charger (24-hour full recharge) Input power: 2.1 W Input current: 0.025 A @ 120 V  |  0.010 A @ 277 V Mounting Snap-fit backplate mounts to standard 4" junction boxes Top/side ½" knockouts for conduit feeds Wall or ceiling surface-mount Housing Injection-molded, flame-retardant UL 94 5VA thermoplastic (white or black) Options SPV — special-voltage input 208/220/240 VAC (50/60 Hz) Warranty / Listings 5-year warranty on electronics and housing; battery prorated 5 years UL 924 listed for damp locations (0 °C to 50 °C) Meets NFPA 101, NEC, OSHA, and applicable state/local codes Dimensions 9 ½" W × 4 ¾" H × 2 ¼" D Thermoplastic LED Emergency Lights — Spacing, Power & Install Pattern These models come from our thermoplastic LED emergency lights . Choose by spacing at typical mounting height, input options, and install pattern. Model / Link Spacing @ MH Input Options Battery / Runtime Diagnostics Mount Pattern Best Use This model — compact dual-head LED emergency light ~14 ft C-to-C @ 7.5 ft (3 ft path) 120/277 VAC (opt. SPV 208/220/240) 3.6 V Ni-Cd · 90 min — 4" J-box; wall/ceiling surface Budget interiors, standard aisles & rooms low-profile thermoplastic emergency light (higher spacing) ~30 ft C-to-C @ 10 ft (HL option) 120/277 VAC (opt. SPV 208/220/240) 3.6 V Ni-Cd · 90 min SDT (optional) 4" J-box; wall/ceiling surface Longer runs, corridors, higher MH LED low-profile emergency light (compact) ~35 ft C-to-C @ 7.5–10 ft (typ.) 120/277 VAC 3.6 V Ni-Cd · 90 min — 4" J-box; wall/ceiling surface Tight layouts; offices / retail high-lumen thermoplastic emergency lights >35 ft C-to-C (model dependent) 120/277 VAC Ni-Cd / NiMH · 90 min SDT on select models 4" J-box; wall/ceiling surface Large spaces; higher ceilings wet-location LED emergency lights Varies by model / IP/NEMA 120/277 VAC Ni-Cd / SLA · 90 min SDT on select models Surface / conduit as specified Exterior doors, hose-down bays dual 1 W LED heads Ni-Cd 90-minute emergency unit damp-location UL 924 compliant surface-mount 4" J-box special voltage SPV 208/220/240 adjustable optics for egress budget-friendly emergency lighting