Wet-Location LED Emergency Light – 3.7W Remote Option, IP Rated

Wet‑Location LED Emergency Light — Dual 1.9 W Heads, 3.7 W Remote Option, −20–50 °C — Features & Specs The LED‑RX wet‑location LED emergency light uses a flame‑rated, sealed polycarbonate enclosure with a hinged cover to keep water and debris out while delivering reliable egress illumination. Two fully adjustable 1.9 W LED heads support outdoor paths, decks, and loading areas down to −20 °C. Select the remote‑capable (R) configuration to power up to 3.7 W of remote heads. For more options, see our best‑selling wet‑location emergency lights. UL 924 Wet Location −20–50 °C Ni‑Cd / 90 min 120/277 VAC Dual 1.9 W Heads 3.7 W Remote (opt.) UL 94 5VA Wall‑Mount Key Features Fully sealed, UL 94 5VA polycarbonate housing with hinged cover and stainless hardware. Two adjustable 1.9 W LED heads; sample spacing guides available (see Spec Sheet). Remote‑capable (R) models provide 3.7 W to power two MLED remote heads. UL 924 listed for wet locations; operates from −20 °C to 50 °C. Maintenance‑free Ni‑Cd battery with 90‑minute emergency runtime; ~24 h recharge. Dual‑voltage 120/277 VAC, solid‑state charger, push‑to‑test, LVD & brownout protection. Surface wall‑mount via external bracket and universal J‑box pattern; weatherproof gasket included. Finishes: Gray (std.) or Black (BL); optional CEC configuration. Applications & Design Notes Ideal for exterior stair towers, parking structures, breezeways, and wash‑down areas that need a compact, sealed LED egress fixture. Use the 3.7 W remote output to place additional heads at far landings or shadowed corners—great for long runs where a single power source simplifies wiring. For broader configurations (NEMA/IP, MR16 throw, or high remote capacity), browse our weatherproof emergency lights. Related Wet‑Location Guides Selecting Outdoor Emergency Lights Remote Heads vs Integrated Spec Sheet Download LED‑RX Emergency Light Spec Sheet (PDF) Specifications (Overview) Listings: UL 924 emergency lighting; wet‑location rated Operation: 90 minute emergency runtime; typical 24 h recharge Input: dual‑voltage 120/277 VAC, 60 Hz Housing: impact/UV‑resistant polycarbonate, UL 94 5VA, sealed & hinged cover Temperature: −20 °C to 50 °C (−4 °F to 122 °F) Remote (R) option: 3.7 W output for two MLED remote heads Illumination Two adjustable 1.9 W LED heads (long‑life emitters ≈100,000 hours). Sample spacing: 22 ft c‑to‑c on a 3 ft path at 7.5 ft MH; ~14.5 ft on a 6 ft path (see photometrics in the spec sheet). Electrical Universal 120/277 VAC input; solid‑state charger with push‑to‑test. Maintenance‑free Ni‑Cd battery; 90‑minute egress runtime; brownout sensing; low‑voltage disconnect. Remote‑capable (R): 3.7 W remote output for compatible remote heads. Mounting Surface wall‑mount with external bracket; universal J‑box pattern; weatherproof gasket included. Housing Flame‑rated UL 94 5VA polycarbonate; sealed, hinged cover with stainless hardware. Finishes: Gray (standard) or Black (BL). Dimensions 8.0" W × 12.2" H × 3.6" D Warranty / Listings 5‑year warranty on electronics/housing; 5‑year prorated Ni‑Cd battery warranty. Meets UL 924, NFPA 101, and NEC requirements for emergency egress lighting. Installation & Wiring Tips Mount 7–10 ft high and cross‑aim heads to overlap footprints; verify foot‑candles at the 90‑minute mark. For the R option, keep on‑board heads + remotes within 3.7 W; consider voltage drop and wire gauge. Use liquid‑tight fittings and keep the hinged cover gasket clean for a reliable seal over time. Compare With Other Wet‑Location Emergency Lights Side‑by‑side from the parent collection (H1 anchors; no pricing displayed). Model (H1) Heads / Output Remote‑Capable Runtime Ratings Operating Temp Housing Best For This model — Wet‑Location LED Emergency Light – 3.7W Remote Option, IP Rated Dual 1.9 W LED heads 3.7 W (option) 90 min UL 924 · Wet Location −20–50 °C UL 94 5VA polycarbonate Parking decks, loading areas, wash‑down zones Wet‑Location LED Emergency Light – 1W Heads, Gasketed IP Housing Dual 1 W LED heads — 90 min UL 924 · Wet Location ≈10–40 °C Polycarbonate Budget installs; modest spacing Industrial Outdoor Emergency Light – Remote Capacity Dual 1.875 W sealed LED 3.7 W 90 min UL 924 · Wet Location −20–50 °C Gasketed polycarbonate Docks; long runs with a small remote load Wet Location Emergency Light – NEMA 4X – Dual MR16 Heads Dual 3.6 W MR16 Up to 46.8 W 90 min NEMA 4X · IP66 · UL 924 · NSF to −25 °C (opt.) Sealed polycarbonate Hose‑down / food‑service; multi‑remote feeds Wet‑Location Semi‑Recessed LED MR16 Emergency Unit Dual 7 W MR16 — 90 min UL 924 · Wet Location ≈20–40 °C Vandal‑resistant Flush look; long‑throw optics Outdoor Wall‑Pack Emergency Light – Decorative Die‑Cast Dual 6 W LEDs (AC 1,286 lm) — 90 min UL 924 · Wet Location 0–50 °C (to −30 °C w/ CW) Die‑cast aluminum Entries needing dusk‑to‑dawn AC + egress FAQs How many remote heads can I power? The R option provides 3.7 W total. A common pairing is two low‑watt MLED remotes; keep combined wattage within 3.7 W and account for voltage drop on long runs. What’s the difference between this unit and a NEMA 4X MR16 model? This unit is compact and integrated with sealed heads. NEMA 4X MR16 platforms add hose‑down construction and higher remote capacity for industrial wash‑down or multi‑remote layouts. Can I mount it on an exposed exterior wall? Yes. Use the provided bracket and gasket on a weather‑tight J‑box, seal any conduit entries, and follow the spacing guidance in the spec sheet. wet‑location LED emergency unit 3.7 W remote‑capable egress light UL 94 5VA flame‑rated housing −20 to 50 °C battery‑backup light LED remote heads for egress 120/277 V dual‑voltage emergency