LCP-8 Holography Experiment Kit Enhance Model

Holography Experiment Kit Enhance Model Based on the basic model (LCP-7), LCP-8 is a complete model that includes conventional silver salt holographic plates with related accessories. Apart from the experiments that can be conducted with LCP-7, LCP-8 can be used to conduct more experiments in a darkroom with the aid of a tri-color safety lamp for transmissive and reflective hologram recording, including two- and three-dimensional hologram, one- and two-step rainbow hologram, image plane rainbow hologram, holographic reproduction, holographic device fabrication (transmissive or reflective holographic grating, and holographic lens), and holographic storage. Note: a stainless steel optical table or breadboard (1200mmx600 mm x 600 mm) with optimal damping is needed for use with this kit.   Experiments 1. Fresnel holographic photography 2. Image plane holography 3. One-step rainbow holographic photography 4. Two-step rainbow holographic photography 5. Holographic grating fabrication 6. Holographic lens fabrication 7. High-density high-capacity holographic data storage 8. Holographic interferometry 9. Holographic reproduction Specifications Item Specifications Semiconductor Laser Center Wavelength: 650 nm Line width: < 0.2 nm Power > 35 mW Exposure Shutter and Timer 0.1 ~ 999.9 s Mode: B-Gate, T-Gate, Timing, and Open Operation: Manual Continuous Ratio Beam Splitter T/R Ratio Continuously Adjustable Single-Sided Rotary Slit Slit Width: 0 ~ 5 mm (continuously adjustable) Rotation Range: ± 5° Holographic Plate Photopolymer and Silver Salt Part List   Description Qty Semiconductor laser 1 Laser safety goggles 1 Exposure shutter and timer 1 Universal magnetic base 12 Two-axis adjustable holder 6 Lens holder 2 Plate holder 1 each Two-axis adjustable holder 1 Sample stage 1 Single-sided rotary slit 1 Objective lens 1 Beam expander 2 Lens 2 Plane mirror 3 Continuous ratio beam splitter 1 Small object 1 Red sensitive polymer plates 1 box (12 sheets, 90 x 240 mm per sheet) Silver salt holographic plates 1 box (12 sheets, 90 x 240 mm per sheet) Tri-color safety lamp (red, green, or yellow) 1 Illuminometer 1 Information slide 1 Fixed ratio beam splitter 2 Instruction manual 1 Note: a stainless steel optical table or breadboard (600 mm x 600 mm) with optimal damping is needed for use with this kit.