Laticrete Quick Cure Hydro Ban Waterproofing Membrane

Laticrete Quick Cure Hydro Ban Waterproofing Membrane - 1 Gallon Hydro Ban Quick Cure is a rapid, ready-to-use waterproofing membrane with wet-sure technology that allows it to cure even in humid, cold, or damp environments. The Quick Cure waterproofing membrane allows for flood testing within just 30 minutes—the contractor can install a full shower system all in one day! Features 1-gallon unit approximate coverage - 134 ft/gal Designed for both commercial and residential tile installations suited for interior substrates Easily applied with a paintbrush or roller Bonds directly to metal, PVC, stainless steel, and ABS drain assemblies It can be used in humid, cold, and damp environments Allows for flood testing in 30 min. at 70°F (21°C) or higher Allows for crack isolation up to 1/16 when applied at 30 mils thick; anything over will require the use of fabric within any cove, corner, movement joint, and other areas of transition Thin; only 0.012" (0.3 mm) thick when cured Exceeds ANSI A118.10 No solvents and non-flammable Install tile, brick, and stone directly onto the membrane Eco-friendly, Low VOC Uses Swimming pools, fountains and water features Shower pans, stalls, and tub surrounds Industrial, commercial, and residential bathrooms and laundries Spas and hot tubs Kitchens and food processing areas Terraces and balconies over unoccupied spaces Countertops Suitable Substrates Concrete Concrete and Brick Masonry Cement Mortar Beds Cement Plaster Gypsum Wallboard Exterior Glue Plywood Ceramic Tile and Stone Cement Terrazzo Cement Backer Board Poured Gypsum Underlayment