Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B

Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B Two components are high-strength epoxy adhesives formulated for spot bonding fixing methods for tile and stone installations on vertical surfaces. The adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).   Features Best speed and productivity over mechanical anchoring, plaster, and wire, and the thin-set method of veneer installation Easier to work with when compared to traditional methods; no drilling, cutting of kerfs, or setting of pins Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B allows for quick, easy plumb adjustment while the stone is in place to compensate for uneven walls and stone thickness variations Permanent; it will not fail or deteriorate over time and is ICC and IBC-approved Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)   Uses Spot bonding marble, granite, and large format ceramic tile on walls and overheads, interior and exterior applications Adhesive for bonding masonry, precast concrete, and stone panels Ideal for fireplace surrounds, elevators, and stair risers Adhesive for bedding and fastening marble, granite, and other stone slabs on walls and wainscoting Adhesive for fabricating granite, marble, and other stone Approved by TCNA for Interior applications method W215 and W260 Advantages Fast Permanent Bond-45 minutes to 1 hour set time Easy to Use-1:1 mixing ratio by volume Non-Staining-ideal for white and light-colored? marbles, other stones, and tiles Withstands shock and vibration Durable Permanent Bond-will not deteriorate over time Safe-no solvents Non-Sag-when applied up to 1" (25 mm) thick Approved by the following building code bodies for exterior installations: ICC and IBC   Interior Substrates Concrete Concrete masonry units (CMU) Brick/masonry Exterior glue plywood Consult cement backer board manufacturer for specific installation recommendations Steel surface must be cleaned to remove oil, dust oxidation, and other bond-inhibiting materials   Exterior Substrates Please consult LATICRETE Technical Services at 800.243.4788, ext. 235, for approval prior to use for all exterior applications There is a maximum height restriction of 30 ft (9.1 m) For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242   Concrete Application Must be a minimum 6" (150 mm) thick reinforced Must be a minimum 3500 psi (24 MPa) Must be a minimum of 28 days old prior to installation CMU Double wythe walls only