Laticrete Hydro Ban 1 Waterproofing Membrane

Laticrete Hydro Ban 1 Waterproofing Membrane Another industry first from LATICRETE, HYDRO BAN® 1 redefines waterproofing with its innovative, single-coat, trowel-applied formula. Engineered for both waterproofing and crack isolation, this advanced waterproofing solution allows installers to work faster and smarter using a trowel-on waterproofing method. Features Curing temperature range ≥ 35°F or higher allows it to cure in a variety of different environmental conditions and substrate temperatures ASTM E96 Rated for steam showers and steam rooms Meets or exceeds ANSI A118.10, the most widely accepted waterproofing standard Meets or exceeds ANSI A118.12, providing 1/8" (3.175 mm) anti-fracture protection (no fabric required) 2 to 3 Hours to flood test† so you can expedite the installation process Extra heavy Robinson Rating for a durable, long lasting install Cure indicator – color changing technology gives you peace-of-mind and ease of inspection Equipped with Microban® antimicrobial technology to protect the waterproofing membrane HYDRO BAN® 1 can be flood tested in 2 to 3 hours when the waterproofing membrane is cured and the substrate is 70°F (21°C) and 50% RH or greater for 2 hours. The curing time period starts when the HYDRO BAN 1 color has changed from a hi-vis green to a dark shade indicating a cured liquid waterproofing membrane. If the substrate and the air temperature are lower than 70°F (21°C) and 50% RH, flood testing can not be performed until the HYDRO BAN 1 color has changed from a light to a darker shade and then 24 hours has lapsed. Available in 1, 3.5, and 5-gallon sizes