Laser Right Angle Level, 90° Cross Line Laser Level with Dual Bubble Vials, Compact Horizontal & Vertical Alignment Tool for Tile, Picture Hanging, Woodworking, DIY & Home Projects

See The Reference Before You Make The Mark Put A Visible 90° Guide Right On The Work Surface. A compact dual-line laser level with two built-in bubble vials, designed to project perpendicular red reference lines for everyday wall layout, installation, carpentry and DIY alignment jobs. ➕ Perpendicular Red Lines 🫧 Dual Bubble Vials 📐 Right-Angle Layout 90° Make Square Layout Visible Two intersecting laser axes create a clear right-angle reference across the work surface. 🫧 Check The Tool Position Horizontal and vertical spirit vials give you physical references before you begin marking. 🧰 Keep It Within Reach A compact body makes it easy to store beside your tape, square and other everyday layout tools. 90° RED LASER REFERENCE ◆ HORIZONTAL + VERTICAL ◆ 2 BUBBLE LEVELS ◆ COMPACT FORMAT ◆ WALL + CARPENTRY LAYOUT ◆ DIY INSTALLATION TOOL ◆ 90° RED LASER REFERENCE ◆ HORIZONTAL + VERTICAL ◆ 2 BUBBLE LEVELS ◆ COMPACT FORMAT ◆ WALL + CARPENTRY LAYOUT ◆ DIY INSTALLATION TOOL ◆ Stop Trying To Extend A Tiny Pencil Mark By Eye Project The Direction Across The Surface Before You Start Drilling Or Mounting. A short mark can tell you where to start, but it does not always show whether the whole installation is following the same line. This compact tool projects a longer visual reference so alignment is easier to judge before committing. ↔ Horizontal Guidance Create a visible line for compatible shelving, wall decor and installation work. ↕ Vertical Guidance Use the perpendicular axis when an upright reference matters to the layout. ＋ Right-Angle Reference Use both projected axes together when the project calls for a clear 90° visual guide. Small Enough To Stay In The Everyday Toolkit Approximately 4.6 Inches Along The Longer Side. The current product dimension image shows a body measuring approximately 11.7 cm by 7 cm, giving it a compact footprint for home projects, workshop use and installation kits. 11.7 Approx. 11.7 cm About 4.6 inches along the longer side according to the current product graphic. 7 Approx. 7 cm About 2.8 inches across the shorter side shown in the same dimension image. ✋ Compact Handling The small low-profile housing is designed for straightforward positioning on suitable surfaces. The current written specification section also states 120 × 79 mm, which does not exactly match the measurement printed in the product image. Dimensions are therefore presented here as approximate rather than exact. Bring The Reference To The Room Use A Visible Line When The Whole Installation Needs To Look Aligned. Current seller imagery demonstrates the red laser reference across interior walls and furniture areas, showing how the tool can help visualize placement over a larger section of the room. 🖼️ Wall Decor Plan compatible picture, mirror and decorative arrangements along a common visual reference. 🗄️ Cabinet Work Use the projected line as an alignment aid during suitable furniture or cabinet projects. 🪚 Carpentry Bring horizontal, vertical and square references into everyday woodworking layout tasks. 🏠 DIY Installation Useful for shelves, trim and other home projects where visual alignment matters. Simple Controls • Physical Level References • Dual Laser Output Everything You Need To Check Is Visible On The Tool. The current product photography clearly shows two bubble vials, top-mounted controls and the laser outlet integrated into the compact green housing. 🫧 Horizontal Spirit Vial Check the bubble position while setting up the tool for a horizontal reference. 🫧 Vertical Spirit Vial A second bubble level provides another physical orientation reference. 🔘 Accessible Controls Control knobs are positioned on the upper surface beside the level vials. 🔴 Dual Red Output The edge of the housing projects the perpendicular red reference lines shown in the seller imagery. Position • Check • Project Go From Blank Surface To Visible Reference In Three Steps. Position The Tool Place it at the starting point of the layout on a stable surface suitable for the project. Check The Vials Adjust its position as needed while using the integrated bubble levels as visual references. Project & Mark Turn on the required red laser reference, confirm the layout and then make your project marks. Straightforward By Design No Complicated Screen Between You And A Basic Alignment Job. The physical product shown on the current page is centered on laser-line projection and traditional bubble-level references, making it suitable as a simple visual layout aid for common projects. ＋ Clear Cross-Axis Reference Two perpendicular axes help make right-angle positioning easier to visualize. 🫧 Bubble Levels Stay Visible Physical leveling references remain available whether you are checking setup or projecting the line. 🟩 Easy-To-Spot Housing The green case makes the small tool easy to identify among other workshop equipment. Product Highlights A Compact Alignment Tool Built Around The References You Can Actually See. 90° Guide Perpendicular Red Laser Lines Two intersecting axes create a visible right-angle reference for compatible layout work. Horizontal Carry A Line Across The Surface Use the projected horizontal reference when planning suitable wall and installation projects. Vertical Add An Upright Reference The second laser axis gives you a perpendicular visual direction without drawing it by hand. 2 Vials Integrated Spirit Levels Two physical bubble vials are clearly visible in the current product photography. Compact Approx. 11.7 × 7 cm The current product image shows a body footprint of roughly 4.6 × 2.8 inches. DIY Useful Across Everyday Projects Wall layout, furniture, cabinetry, carpentry and home installation are practical applications. Current Listing Details Specifications Without Filling In The Gaps. Product Type Compact dual-line red laser level / alignment reference tool Laser Layout Perpendicular horizontal and vertical red reference lines Spirit Levels 2 integrated bubble vials visible on the current product Approx. Image Size 11.7 × 7 cm / approximately 4.6 × 2.8 in Written Listing Size 120 × 79 mm; differs slightly from the current image graphic Housing Material ABS engineering plastic according to the current written listing Power Source AA batteries according to the current written listing Laser Classification Class 1 / Class I is stated in the current seller specification section Seller-Listed Working Distance Current written listing states up to 30 m on a working surface; actual visibility can vary with lighting and surface conditions Suggested Applications Wall alignment, cabinetry, furniture layout, carpentry, renovation and DIY installation The current seller page contains internally inconsistent technical information. It mentions digital measurement, 360° measurement, ±0.1° accuracy, 0.05° resolution and a separate ±0.2 mm/m figure, while the product photographs show two bubble vials and no visible digital display. Those conflicting digital-angle claims are intentionally not presented as verified features here. Aim At The Project • Not At Eyes Use The Laser As A Layout Aid And Keep Basic Laser Safety In Place. 👁️ Avoid Direct Eye Exposure Never intentionally look into the laser outlet or point the beam toward another person's eyes. 🪞 Watch Reflective Surfaces Mirrors, polished metal and reflective glass may redirect the beam in an unintended direction. 📏 Verify Critical Measurements For precision or safety-critical work, confirm final layout with the appropriate calibrated measuring equipment. A laser line helps with alignment, but it does not detect pipes, wiring or structural hazards behind a wall. Check for hidden utilities before drilling or fastening. Quick Answers Before You Make The First Mark. What does this tool actually project? The current product photography shows two red laser lines positioned perpendicular to one another, providing horizontal, vertical and 90° visual references. Does it include bubble levels? Yes. Two traditional spirit-level vials are clearly built into the top of the product. Can I use both laser lines together? The product imagery shows the perpendicular outputs working as a right-angle reference, making the two-axis layout one of the product's main visible features. Is this a digital angle finder? The actual product photography does not show a digital screen. Although the seller's written description contains digital-angle language, the visible product is presented here as a dual-line laser and bubble-level alignment tool. How large is it? The current dimension image shows approximately 11.7 × 7 cm, or around 4.6 × 2.8 inches. Why does the written page show another measurement? The written specification section states 120 × 79 mm, which is slightly different from the product-image measurement. Dimensions are therefore treated as approximate. What material is the housing? The current seller specification identifies the housing as ABS engineering plastic. What type of battery does it use? The current written listing states AA battery power. Check the battery compartment and supplied instructions for the required number and orientation. Can I use it for picture frames and shelves? Yes. A projected horizontal line can serve as a useful visual reference for compatible wall decor and shelf layout. Confirm final mounting locations before drilling. Can I use it for cabinetry or carpentry? Yes. Cabinetry, carpentry, furniture layout and general DIY installation are consistent with the applications described and pictured on the current listing. Does it have magnetic attachment? Magnetic attachment is advertised in the seller's written description. No verified magnetic holding-force specification is provided, so actual holding performance should not be assumed on every surface. How far can the laser project? The current written specification lists a working distance of up to 30 m. Real-world line visibility can vary significantly with ambient lighting, target color, surface texture and viewing conditions. What is the exact accuracy? The current seller page contains conflicting accuracy figures, so no single verified accuracy value is claimed in this rewritten description. Use an appropriate calibrated instrument when exact measurement is critical. Does it measure 360° angles? The seller's written copy mentions 360° measurement, but the actual product photos do not show a digital angle display or clearly demonstrate that function. For that reason, a verified 360° digital-angle feature is not claimed here. Position • Check • Project • Mark Make The Alignment Visible Before The Installation Becomes Permanent. Keep a compact laser reference close for shelves, frames, cabinetry, woodworking and everyday home projects—combining perpendicular red lines and two physical bubble levels in one simple layout tool. Add A Clearer Reference To Your Toolkit ↑ ➕ 90° Laser Reference 🫧 2 Bubble Levels 📐 Compact Design 🛠️ DIY + Installation Laser alignment aid. Avoid direct eye exposure and unintended reflections. The current source listing contains conflicting dimension, accuracy and digital-angle specifications; unsupported or internally inconsistent performance claims have therefore been omitted or clearly qualified. Verify critical measurements with appropriate calibrated equipment and check for hidden utilities before drilling.