Large Wall Repair Kit

The Tub Repair Company Large Wall Repair Kit is designed to fix most large cosmetic damage to fiberglass and acrylic bathtubs. It also works well in repairing rusted out areas in cast iron tubs. This kit can tackle non-weight bearing cracks up to 9 inches long or holes roughly 4 inches in diameter (or roughly the size of a baseball). It is not designed for weight-bearing repairs; refer to the Floor Crack Repair Kit for weight-bearing repairs.  This kit matches nearly any color with our easy to-use color matching system. Refer to the instructional video library for easy step-by-step directions. Most repairs with this kit will take approximately 1.5 hours and will need 24 hours to cure. This Repair Kit includes all the products you'll need to fix your bathtub. The system will provide a durable repair that will last indefinitely and save you a lot of money.  Products included in Level 2 Kit:  Marine-grade short strand fiberglass putty and hardener  Fine finish putty filler and hardener  Preval spray system (plus back up cartridge) Color match coating system  Wipe on primer  80 and 120 grit 5" orbital sandpaper (Hook & Loop) 1000, 2000, & 3000 grit sandpaper Acetone  Putty Spreader Rubber Gloves  Mixing cup  Mesh tape  Stir sticks  Equipment Recommended to use: Respirator (not just a dust mask) 5" Orbital Sander Vacuum Blow Dryer Extension Cord 3 Prong Splitter Power Drill Drill Bits Scissors or Box Cutter Paper Towels Trash Can Estimated Project Time: 2.5 hours Cure Time: 24 Hours UPC: 198168392270