Land Rover LR2 Body Control Module (BCM) / Central Junction Box (CJB) Clone Programming & Data Transfer Service

Land Rover LR2 Body Control Module (BCM) / Central Junction Box (CJB) Clone Programming & Data Transfer Service 2008–2012 Models (Delphi Flat End-Connector BCM/CJB) This service provides plug-and-play cloning and data transfer for the Body Control Module (BCM), also known as the Central Junction Box (CJB), used in 2008–2012 Land Rover LR2 vehicles. These Delphi-built modules share the same hardware platform as the early Volvo P3 CEM and can be cloned by transferring all required vehicle-specific data from your original module to a matching replacement. We copy all necessary vehicle-specific data from your original BCM/CJB into a donor module that you provide, allowing the replacement module to be installed with no dealer programming required in most cases. Important Notes Part numbers should match between the original and donor BCM/CJB for a successful clone. Your original BCM/CJB must have diagnostic communication. You must send both the original and donor BCM/CJB for service. After installation, simply clear any stored fault codes using a compatible diagnostic scan tool. Supported Vehicle Land Rover LR2 (L359) – 2008–2012 Supported Part Numbers (Examples) 6G9T-14A073-KA AG9T-14D572-KA 6G9T-14D572-KA Additional part numbers may also be supported. If your part number is not listed, please contact us with the part number or a clear photo of the label before ordering. If you're unsure about compatibility, simply send us your BCM/CJB part number or a clear photo of the label, and we'll be happy to verify whether your module is supported.   © 2026 Velectronix. All Rights Reserved. This product description is original content. Unauthorized copying, scraping, or reproduction is prohibited. Protection ID: VELECTRONIX-ORIGINAL-CONTENT-2026-V1