Laguna Industrial Shaper, Raised Panel Master 5

Laguna Tools Industrial Shaper, Raised Panel Master 5 Laguna is proud to introduce our latest Industrial Series machine, the Raised Panel Master. This machine is designed to allow a single operator to produce a complete cabinet door in less than 2 minutes. The single-piece welded steel frame provides the ultimate support for chatter-free work. The heart of the machine is a shaper spindle which holds all three cutters needed to produce a door. The spindle is powered by a 10 HP motor for smooth cuts and is quickly positioned from the front of the machine with a dial. The turret system insures complete accuracy without test cuts and the pneumatically controlled spindle height is quickly set. The 2 axis sliding table rides on linear bearings in all directions and includes a pneumatic hold-down clamp for quick setup. The pneumatic EZ fence quickly positions stock for the next cut. A large diameter tracer bearing provides perfect control for straight and curved template following. Features Motor: 10hp 220v 3-phase w/ VFD Speed range: 6000 to 8000 RPM Spindle: 1-1/4″ Diameter x 7-1/4″ Height Cutter capacity: up to 7″ Diameter Specifications The heart of the machine is a shaper spindle which holds all five cutters needed to produce a door. The spindle is powered by a 10 HP motor for smooth cuts and is quickly positioned from the front of the machine with a dial. The turret system insures complete accuracy without test cuts and the pneumatically controlled spindle height is quickly set. The 2 axis sliding table rides on linear bearings in all directions and includes a pneumatic hold-down clamp for quick setup. The pneumatic EZ fence quickly positions stock for the next cut. A large diameter tracer bearing provides perfect control for straight and curved template following. Compressed Air Requirement: 90 PSI 1 CFM Dust Port: 5″ Maximum Arch Height: 2 Standard Maximum Material Thickness: 1-¼″ Maximum Arch Width: 24″ Weight: 1500 lbs Motor: 10hp 220v 3-phase w/ VFD Speed range: 6000 to 8000 RPM Spindle: 1.25 Diameter x 7.25 Height Cutter capacity: up to 7 Diameter *Carbide insert tooling sold separately