KW V1 Coilover Kit - BMW M3 (E30) Coupe - 102200DB

KW V1 Coilovers Sporty handling combined with outstanding looks. With factory pre-configured damping. The KW V1 coilover kit is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life. Continuous lowering With the KW V1 coilover you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring. The benchmark for tuning fans KW V1 coilover satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW V1 coilovers rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving. Trust In Our Experience We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 25 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers. Optimally pre-adjusted Sporty and comfortable dampening technology Stainless steel technology "inox-line" Individually height adjustable tested adjustment range Ready to install complete solution High quality components for a long durability Complete documentation for easy handling Setup - Factory pre-configured damping setup The KW V1 coilover kit has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW V1. Highlights: Sporty look and improved road holding Fixed damper identification, perfectly matched to your car Pass the TÜV without hesitation thanks to the parts certificate All Features At A Glance: Customized Lowering Trapezoidal thread Tested on the 7-Post Composite spring seat High-quality stainless steel housing Technical component report Fitment (per KW Suspensions): 1988-1991 BMW M3Lowering Range: F: 1.0-2.2" / R: 1.0-2.2" Fitment Notes: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers) When using original tires, wheel offset spacers may be required Front axle coilovers incl. Knuckle in galvanized steel Not for vehicles with electronic damping Specifications: KW Shipping Weight: 49.6 lb UPC: 847691099759 PN: 102200DB Actual product may vary. Pictures used for marketing purposes only.