Kvaser Mini PCI Express HS

(Not for new designs. The recommended replacement for this part is Mini PCIe 1xCAN (01368-1). The Kvaser Mini PCI Express HS is a highly-integrated CAN add-on board that allows embedded system developers to add CAN functionality to any standard computer board with mini PCI Express capability. The piggyback CAN board offers a single channel, high speed CAN interface with error frame detection and on-board buffer. This board has a low profile connector that complies with the mini PCI Express standard, which connects via a cable to a DSUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, this arrangement protects total system EMC performance because all the electronics remain inside the computer housing. In car or truck applications, this can be particularly important. Designed for applications requiring high performance but a small form factor, this board is ideal for embedded data acquisition systems and is particularly tailored for fleet management. Features Tech Specs Documents Downloads Supports a bit rate from 40 to 1000 kbit/s and a CAN transfer rate up to 20000 messages/s. Time stamp accuracy is 25 µs. Low profile connector complies with the mini PCI Express standard, which connects via a cable to a DSUB (or other type) at the computer housing. A 4 pin Molex connector provides single CAN channel access. Complies with EN 61000-6-2:2005, specifying EMC immunity for industrial environments. Operates over the industrial temperature range of -40 to +85°C. Kvaser's free of charge CANLIB SDK can be used to develop software for the Mini PCI Express HS board. Support for Linux, in the form of drivers and a dedicated SDK, are available as a separate download Support for SocketCAN, see elinux.org for details. Includes Molex to DSUB9 cable adapter. Property Value The information herein is subject to change without notice. Galvanic Isolation Yes Bitrate 40-1000 kbit/s Silent mode Yes Error frame generation No Error frame detection Yes Weight 6 grams Timestamp resolution 25μs On board buffer No Maximum message rate, send 18000 Maximum message rate, receive 20000 Sound No Clock synchronization N/A Temperature range -40°C to +85°C Dimensions (WxLxH) 30x50x5mm Silent mode Yes Error frame generation Yes Error frame detection Yes Weight 5 grams Timestamp resolution 1 μs On board buffer N/A Maximum message rate, send 20000 Maximum message rate, receive 20000 Sound No Clock synchronization N/A Temperature range -40°C to +85°C Dimensions (WxLxH) 30x51x5mm Datasheet Kvaser Mini PCI Express HS Datasheet <Kvaser Mini PCI Express Users Guide User guide for Kvaser Mini PCI Express Version V1.0.0 Kvaser DIADEM Driver This free driver for National Instrument's DIAdem supports all CAN hardware from Kvaser. Version 1.0.0 Kvaser Drivers for Windows Windows drivers for all our CAN hardware. Please check release notes for information on which Windows versions are supported. It also contain a driver for the virtual CAN bus. Version 5.6.0 Kvaser CANKing A free of charge general-purpose CAN bus momnitor. Works with all CAN interfaces from Kvaser. Windows 200 and later recommended. Version 5.3.889 Kvaser CANlib SDK Software development kit - everything you need to develop software for the Kvaser CAN and LIN interfaces. Link libraries, header files, sample programs, Microsoft Visual Basic and Borland Delphi components, documentation, and more. Note: you need to download and install the appropriate device drivers separately Version 5.6.0 Kvaser LabView VI Library for CAN Library for National Instrument's LabView version for all Kvaser CAN hardware. Version 6.1.0 Kvaser Linux Driver and SDK Linux driver and SDK for Kvaser PCIcan/PCIcanx, Kvaser PCIcanII, Kvaser PC104+, Kvaser PCIcanx II, Kvaser USBcan II, Kvaser Memorator*, Kvaser Leaf family, Kvaser Memorator Pro**, Kvaser USBcan Pro and VirtualCAN. For LAPcan and LAPcan II, you should use version 4.2 of the driver. (*) only with USBcanII functionality, (**) only with USBcan Pro functionality Version 5.3.0 Remove old drivers Driver removal program. This program will remove the CAN driver (version 3.2 or older) from your computer. This is a version intended for those who have installed CANLIB 3.2 or older. Use it only if you need to remove an old version of the driver from your computer. Contact technical support if you have any questions. Version 3.9c Cleanup Driver removal program. This program will remove the CAN driver (version 3.9 or older) from your computer. This program will not work with driver 4.0 or later. Use it only if you need to remove an old version of the driver from your computer. Version 3.9c